PDA

View Full Version : S2000 seats in EM1


MRB18R
02-10-2009, 06:04 PM
hey guys looking at buying s2k seats for my em1... just wondering what rails i would need to fit into em1...
riruiz_88
02-10-2009, 06:05 PM
you need EK/EM rails.
MRB18R
02-10-2009, 06:12 PM
so just stock em1 rails will fit s2000 seats??? your saying...
anzai
02-10-2009, 06:16 PM
man just get the sr3s xD
riruiz_88
02-10-2009, 06:18 PM
so just stock em1 rails will fit s2000 seats??? your saying...

simple as that man :thumbsup:. or you can get low rails such as Vision, Bride etc...
you might need to modify the rails to fit the seats though, not sure.
MRB18R
02-10-2009, 06:20 PM
ohk cool but can i please et a 2nd opinion if they fit straiht on 100%...?
riruiz_88
03-10-2009, 12:18 PM
well you can try and fit them in with S2000 rails, and tell us the outcome. its like fitting racing bucket seats in, you must have rails to suit your car.
MRB18R
05-10-2009, 10:16 AM
ohk thanks hope that will work :):)
BLu CiViC
05-10-2009, 11:18 AM
S2K seats will fit an EK with vey minimal customising. I have it working in my EK Sedan. Everything lines up except the rear mounting point from the EK Rails to the S2K Seat Pan. I just made a custom bracket to fit and it sits nice and firm. This is what followed below.

http://honda-tech.com/showthread.php?t=347548 (http://honda-tech.com/showthread.php?t=347548)

Pics dont work but its pretty detailed. Hope this helps.

S2k Rails WONT fit an EK perfectly. You'd be able to bolt 3 of the 4 mounting points to the floor and possibly fabricate or bend the other mounting point to fit. I opted against that because the S2K being a 2 seater it doest recline the way it should in a sedan and in your case a coupe.