PDA

View Full Version : Integra Audio wires + clock + passenger power wind



Doanhii
12-10-2009, 10:09 AM
Hey guys and girls,

sorry to bother u's ive already tried searching the fourms for this certain problem but couldnt figure out whats wrong first of all.
Sorry this is a integra 94 vti-r

I just brought a headunit for my car and connected most of the wires but when it came to the "constant 12v" it did not seem to work Ive checked the fuses and they arnt any blown at this present time is there an constant 12v in the stereo placements?

Clock? clock doesnt seem to work. but it works when on accessories when i connect the Switched 12v+ to the constant 12v+ the clock works. common problem?

Passenger Door -
the passenger door window doesnt seem to want to move when power windows is active the driver door works it worked before hand but it just seemd to not want to work anymore after i tried yesterday...

i know these maybe stupid problems but i would really appreciate it if anyone could help me with these problems. thanks for your time.
.doanh.

slimx
20-10-2009, 05:03 PM
perhaps a wrong fuse in the fusebox?

I had a situation where every light in my car was gong off because i had the wrong globe in there.. it seems our integra's are a bit fussy lol

Try changing the fuses.. every fuse is like what $6 ? something like that..

phaz
20-10-2009, 09:13 PM
That's funny, i just installed my head deck and the constant wasn't working either, i just ran another cable straight from the battery, solved my problem. After that the clock stopped working, and still isn't so when i get time to try and fix this, ill let you know.

Also my passenger side window goes down extremely slow, i haven't had a chance to look at this yet, and again when i do i'll let you know what i did to fix it.

Btw i got a 93 teg gsi

kairi_k
04-11-2009, 05:14 PM
i know you probably check the fuses under the dash but have you checked the back up fuse in the engine bay? its a 7.5amp one. i presume its most likely blown. that should solve your problem.