Wheels For FN2R

[cyc10n]

Has anyone got after marjet wheels on thier FN2R??? I just went to price some and have been told that i can only get 18 by 7.5, if i go any wider they wont fit coz of the offset. is this true???

[aaronng]

Has anyone got after marjet wheels on thier FN2R??? I just went to price some and have been told that i can only get 18 by 7.5, if i go any wider they wont fit coz of the offset. is this true???

What tyre width do you want to go to? You can use wider rims as long as the offset is suitable and the tyre width is the same. If you want to use wider tyres, you will need to check on how much additional space there is between the stock tyres and suspension when you turn the wheel full lock on both sides.

[cyc10n]

The Ones i Like are 18*8's and the tyre dealer said they wont fit, that i have to go no wider then 18*7.5 which sorta takes most wheels i want outta option

[black8thgen]

uhm, i think the fn2 is similar to fd fitments, and we can fit 18x8 and wider on our fd's reasonably easy, just depends on the offset.

if its 18x8 + 40-45 i believe its fine, im not 100% sure though, and even +35 offset has been done

and then u have stig who fit 20x8.5 +48 lol

[cyc10n]

the wheels i want are oasaka sparks and the figures are
18*8. PCD 5/114.3. offset 40mm. i dont know much bout offset. so if someone could fill me in i'd appreciate it
thanx

[aaronng]

The Ones i Like are 18*8's and the tyre dealer said they wont fit, that i have to go no wider then 18*7.5 which sorta takes most wheels i want outta option

If you stick to the same offset as your stock tyres, use the same tyre width (225/40 R18) and the rims clear your calipers, then they will fit.

[aaronng]

the wheels i want are oasaka sparks and the figures are
18*8. PCD 5/114.3. offset 40mm. i dont know much bout offset. so if someone could fill me in i'd appreciate it
thanx

The FN2R rims are +55 offset. So the sparks will stick out further by 15mm on each side. Measure to see if you have 15mm from tyre to fender inner plastic liner. If you have 15mm space under the fender, then it should fit. Personally, I would get +48, +50 or +55 offset.

[cyc10n]

yeah i just research that looks like i better look for another set of rims DAMN!!! lol

[cyc10n]

well ive found another set lol from oz racing the Superturismo GT in matt black with red lettering they can come with an offset of 45 which should better

[aaronng]

uhm, i think the fn2 is similar to fd fitments, and we can fit 18x8 and wider on our fd's reasonably easy, just depends on the offset.

if its 18x8 + 40-45 i believe its fine, im not 100% sure though, and even +35 offset has been done

and then u have stig who fit 20x8.5 +48 lol

It depends on the tyre size and offset. You can use 20x8.5 +48 with no problems at all with clearance almost like stock by using 225/30 R20 tyres. You can even fit 235/30 R20 tyres which fit and are still legal in terms of rolling diameter (only 11.8mm larger, within the spec of 15mm increase limit)

[lukits01]

My personal preference for FN2 with stock camber settings
[width, offset]
7.5" +35
8" +40
8.5" +45

If you've got some camber say 2deg, take another 5mm out of the offset
I've had 9" +45 at the front with no problem

[cyc10n]

Finally found my wheels and they fit lol been lookin for last 2 days. Lenso GT-6 in 18's, tempe did me a really good deal so will have em on in 2 weeks

[spiderman]

Well mate i have 19x 8 fitted to mine with 235/35/19

just bought volks 18 x 8.5 with 225/40/18 45 offset...and am going to lower it 30mm...

no scrubbing at all....

If you go to some other forums you will see that guys have 20 x 9 fitted with no rubbing too...