ICM - Igniter - b16a - obd0

[Bludger]

Ok ladies, I have a jdm b16a obd0 off an EF8.

Honda does not deal with imports, so my question is which igniter from an AUDM vehicle will suit my application??

I'm having serious doubts that the EK vtir b16a2 igniter will suit.

does it? If not, which one will.

[TODA AU]

http://cgi.ebay.com/ebaymotors/NEW-OBD-0-OBD0-JDM-B-series-Ignition-Distributor_W0QQcmdZViewItemQQhashZitem5883c470a9Q QitemZ380167811241QQptZMotorsQ5fCarQ5fTruckQ5fPart sQ5fAccessories

:thumbsup:

This is likley your best bet.

[Bludger]

Thanks for that Adrian, I sincerely appreciate your help but I was hoping to walk into mekong spares, tell them my audm car that uses the same igniter and part with roughly 60 - 70 buckaroos.

The distributor in my car is actually already a replacement, it looks very new from the outside, defi8nitely not original Honda.

[Bludger]

The dizzy I got, the wiring and plugs look exactly the same as the one in the photo's of that dizzy in the link you gave me Adrian.

Previous owner told me it was replaced and I have a slight hunch that it is a distributor king dizzy.

[TODA AU]

If you're heading into Mekong, pull the ignitor out of the dissy so they can match it up.
It'll probably match with the ignitr from the AUDM EF CRX with D16A8.
But the dissy housings are different on the flange

[Limbo]

i may have one if you want. I got a couple of ICMs from obd1 dizzys.

[Bludger]

i may have one if you want. I got a couple of ICMs from obd1 dizzys.
pm me your number man.

its ok during the night, but i cant drive during the day, cos it won't fire.

LOL