wat error code is this d16y8 93 EH [Archive]

Fo55il

26-10-2009, 08:44 PM

NzfLwAdeFzY

i thoguth it was 3 but its 3 long flashes

bennjamin

26-10-2009, 08:47 PM

that is code 3. Those are 3 short flashes

*typo*

Fo55il

26-10-2009, 08:49 PM

AWWWWWWWWWWWW lol,
so wat exactly shoudl i do now

VTec1987

26-10-2009, 09:14 PM

look lyk its code 3

code 3 is map sensor not 02 sensor.

Check ECUMAN diy, that would help u

bennjamin

27-10-2009, 12:35 AM

yup MAP sensor (ignore my typo)

check to see the clip is firmly held to the MAP sensor. IF so , replace with a known working MAP to see if that fixes the issue

ECU-MAN

27-10-2009, 08:12 AM

make sure you havent got the TPS and MAP connectors crossed

http://www.ozhonda.com/forum/showthread.php?t=67230

Fo55il

27-10-2009, 01:46 PM

crossed?

in what way ?

jords

27-10-2009, 01:47 PM

he means they are plugged into the wrong sensor.

Fo55il

27-10-2009, 01:53 PM

mmm are the plugs the same? geez i better check this now

VTec1987

27-10-2009, 01:59 PM

yeh they are both the same, but most likely if they are both mixed up, then u should get 2 codes which is 3 and 7. You only have code 3, the problem most likely be the sensor.

Did u just do a conversion ? or u been driving same motor for a while?

Fo55il

27-10-2009, 03:20 PM

did change motor to the same it had cause the other blew.

and am only gettin error 3

so i should change the map sensor i guess for now

VTec1987

27-10-2009, 03:22 PM

yeh get it changed and remember to reset the ecu after u changed the map sensor

Fo55il

27-10-2009, 06:13 PM

k boys,

so i serviced the car too, reset the ecu too

so far ... i havent driven it long distances but

after resetting the ecu wen i do the diagnosis it shows me nothing only thing is the engine light stays on. is this normal?

ECU-MAN

28-10-2009, 07:34 AM

if the TPS and MAP are crossed you usually only get one code ( 3 ) not 2 codes. then TPS is still in range when they are crossed.

Fo55il

28-10-2009, 08:42 AM

so atm, im not gettin any errors. i went for a drive last night and fanged it a bit just to make sure everythin was ok

cars still not boosting but it seems to be driving better than before tho.

Fo55il

28-10-2009, 07:34 PM

oiii big boys

so am i all good for now since its not giving any errors?

is that the signal for everythin bein ok ?

the light stays on ?

VTec1987

28-10-2009, 08:15 PM

yes, ur all clear

Fo55il

28-10-2009, 08:18 PM

phew sweettttt

i

ECU-MAN

29-10-2009, 08:48 AM

are you running a modified ROM that supports boost ?