PDA

View Full Version : [Euro]stock wheels weight



Username
21-11-2004, 11:32 PM
hey...

does anybody know the stock wheels weight for the accord euro?

thanks,

baboo
22-11-2004, 08:12 AM
roughly 9kg without tyres.

yfin
23-11-2004, 08:10 PM
And just under 18kg with tyres.

yfin
24-11-2004, 09:10 PM
yfin whats the weight of your setup?
Around 15kg per corner

aaronng
24-11-2004, 09:39 PM
Damn the stockies are heavy......

baboo
24-11-2004, 10:10 PM
unsprung weight is quite important actually.

I remember if you reduce unsprung weight by 1kg is equal to reduce 5kg above the suspension.

aaronng
24-11-2004, 10:45 PM
It improves handling a lot. Also lighter wheels means slightly faster acceleration. Not by much though. hehe

Type R Positive
25-11-2004, 04:46 PM
ok.... heres a newbi question....


will lighter wheels result in more kw at the wheels.... not just less overal weight...:confused: You can not change any hp or torque by changing wheels or flywheel if you may. It justs makes it much more easy to accelerate. You will loose inertia though but the gains you get are more worth while.

yfin
25-11-2004, 05:12 PM
You can not change any hp or torque by changing wheels or flywheel if you may. It justs makes it much more easy to accelerate. You will loose inertia though but the gains you get are more worth while.
Isn't the question power at the wheels? If the wheels are lighter and accelerate easier - the dyno would show more power right?

Type R Positive
26-11-2004, 12:42 AM
Isn't the question power at the wheels? If the wheels are lighter and accelerate easier - the dyno would show more power right?
No, Where is the extra power going to come from? Just better response.
It would be nice though.......:)

Taken from Integra section Toda Lightened Fly Wheel For DC2R???
http://www.ozhonda.com/forum/showthread.php?t=12009

As everyone has said... YES YES YES YES YES YES
Seriously though, this is one of the most cost effective bang for your bucks upgrades you can do on a DC2R.
The difference is sharper acceleration in 1st, 2nd & 3rd, improved engine response & better engine braking...
On the track, this translates directly into reduced lap times.
All this, with no actual power gain or compromise to reliability.
Just more effective use of what you've already got.
Works well with either an OEM clutch or heavy duty item...
The H/D clutch obviously is more fun...
PM, call or email me for pricing
Cheers

Adrian __________________
TODA Racing Aust Pty Ltd
ADVAN Performance 137 Silverwater Rd,
02 96471326 - 0401869524
Showroom/Workshop/Dyno tuning
TODA TRUST EXEDY MOTUL

yfin
03-12-2004, 10:51 AM
[QUOTE=Type R Positive]No, Where is the extra power going to come from? Just better response.
It would be nice though.......:)

Check out this thread - seems like lighter wheels will improve dyno readings.

http://www.ozhonda.com/forum/showthread.php?t=12665&page=1&pp=12

Type R Positive
03-12-2004, 11:20 AM
Cool!

Where does the power come from?

yfin
03-12-2004, 11:39 AM
Cool!

Where does the power come from?My guess is less unsprung weight at the wheels = wheels spin faster for less effort/energy = higher peak power reading.

If you compare a Euro with fat and heavy 19" chromies and a stock Euro with 16"- there will be less power converted to the wheels for the 19" car. It seems sensible to me.

Type R Positive
03-12-2004, 03:59 PM
still unsure..... but who cares? :p

Lighter is always better in my books!

johnprocter
08-12-2007, 01:35 PM
what are some good lightweight tyres to go with some lightweight wheels anyone recommend any?

edit: ah this should be in the euro section

aaronng
08-12-2007, 04:17 PM
Moved. Ray's CE28N and RE30 rims are cheap.

johnprocter
08-12-2007, 05:43 PM
i ment can you recommend some light weight tyres :P not rims/wheels

r-r-redEuro
08-12-2007, 06:19 PM
what about the volk te37's are they lightweights? because im planning on getting them with some continental tyres.

TONTON
04-05-2009, 06:13 PM
roughly 9kg without tyres.

So is that for the 17inch or 16inch wheels?

Crapdaz
04-05-2009, 06:16 PM
9 for 16"
10 for 17"
CE28N, RE30 or TE37 are all lightweight wheels.

Accord Basic
04-05-2009, 06:22 PM
I believe that it won't have extra power as the light wheel won't give extra power. but on the reverse. the heavier wheel need more energy to roll and the power will lost from rotating the heavy wheels. It should say "Energy lost" and the energy lost will effect on the dyno power result. Am I correct? let me know your opinion. Thanks

racerwannabe
04-05-2009, 06:24 PM
i've weighed my 16s with tyres and they are about 15kg. my 18s with tyres are about 22kg. say the 18" wheels weigh 12kg each..dat means de tyres weigh 10kg. do 18" tyres weigh dat much?

Crapdaz
04-05-2009, 06:27 PM
i've weighed my 16s with tyres and they are about 15kg. my 18s with tyres are about 22kg. say the 18" wheels weigh 12kg each..dat means de tyres weigh 10kg. do 18" tyres weigh dat much?
yes they do weigh that much.
accord basic - i think heavier wheels work better on a dyno compared to lightweight wheels.
But in a circuit situation lightweight wheels are better.

Accord Basic
04-05-2009, 06:28 PM
I think so, I got 18" Enkei RP03 and it will slow down my car compare to the stock 16" rims. I didn't weight it, but when I lift both, the 18" + tyres are heavier. not much, about 2 - 3 kg. i think

Accord Basic
04-05-2009, 06:29 PM
would you explain why heavier wheels work better on dyno? Thanks

Crapdaz
04-05-2009, 06:31 PM
I think it is cause there is more momentum once the wheels are in motion and they take longer to slowdown.
I might be wrong but light or heavy if the difference is couple of kgs diff then it plays a slight part, where as if its only 1kg diff then prob not much.

dtngo
04-05-2009, 07:00 PM
I think so, I got 18" Enkei RP03 and it will slow down my car compare to the stock 16" rims. I didn't weight it, but when I lift both, the 18" + tyres are heavier. not much, about 2 - 3 kg. i think
2-3kg may not sound like much, but it will make a fair difference in rotational mass and unsprung weight.

viper8548
04-05-2009, 07:04 PM
2-3kg may not sound like much, but it will make a fair difference in rotational mass and unsprung weight.

Yes thats correct, another thing to note is also the weight distribution, even if 2 wheels weight the same, if a wheel has more mass on the outer diameter if it affect performance more than a wheel with more of its weight closer to the center of rotation.

nebt
05-05-2009, 04:24 AM
just wondering if anyone knows the weight of the stock wheels (18" lux model wheels) on the CU2?

Cheers.

Crapdaz
05-05-2009, 07:08 AM
i think they are on the 11-12kg mark