Engine mount problem DC2 integra

[lookingforboost]

Hey guys i am changing the motor in my DC2 and have come to a problem i am about to put the new motor in and going through the planning of dropping it in i cant workout / see how the rear engine mount goes its the one behind the intake manifold

i cant find a good picture or diagram to help me work out if i am missing somthing or just not seeing it

Thanks guys

[ECU-MAN]

very simple job

drop the engine down onto the left and right mounts.


the rear mount should already be bolted to the xmember, the rear bracket mount should be bolted to the gearbox/block. ensure they line up and you lower the engine ( mage sure the mount doesnt get lobsided inthe bracket )

do up the left mount, do up the right mount, do up the rear mount, then thoes two lower mount on the front on each side.

thats it.

[lookingforboost]

Thanks man i was looking at it and it was a while ago i pulled it out and couldnt remember how the mount was attached i when out and had a good look and now see whats going on :P

having a blonde moment thanks agian