Ek4 brakes

[civicVI]

just wondering EG6 and EK4 F and R brakes are the same?
wanna to change brake pads
car got EG6 F and R brakes set up!
but not sure what brake pads i need to get
thanks :D

[Killa From Manila]

hey try looking up the brakes in the bendix catalogue here to see which cars brakes have identical product numbers
http://www.bendix.com.au/ProductCatalogue.aspx

[BlueSiR]

eg5 and eg6 got the same rear brake pad, but not too sure about the F brake pad is the same or not

[civicVI]

thanks for info:)

i did some research on the net some website say that EK4 = EG6 both F and R are the same, some say that F and R are diff
can someone confirm that
my rear pads are gone only 1mm left
pls help me out

[Killa From Manila]

my car has eg6 rear brakes, i just went to autobarn and got replacement ones for eg6 as they do have it in their model listing

[civicVI]

my car has eg6 rear brakes, i just went to autobarn and got replacement ones for eg6 as they do have it in their model listing


what brand u get
can i have the model code?
thanks a lot

[Killa From Manila]

bendix check my other post

[EG5]

EK4 and EG6 front and rear pads/caliper / disc size are all the same
EG5 runs different front caliper / pads / disc size compared to EK4/EG6 , EG5 rear caliper / disc / pads is the same with EK4/EG6

[civicVI]

EK4 and EG6 front and rear pads/caliper / disc size are all the same
EG5 runs different front caliper / pads / disc size compared to EK4/EG6 , EG5 rear caliper / disc / pads is the same with EK4/EG6

thanks a lot
good learn:thumbsup:

[civicVI]

EK4 and EG6 front and rear pads/caliper / disc size are all the same
EG5 runs different front caliper / pads / disc size compared to EK4/EG6 , EG5 rear caliper / disc / pads is the same with EK4/EG6

just check with bendix online catalogue
VTI-R 1.6 have two different model "Akebono Caliper" DB1286 and "Aumitomo Caliper" DB1262
which one should i pick ?
mine one is EG6 brake setup

[mugen_ctr]

off topic slighty, whats for a EJ8? theres no listing for them :S

[Mikecivic78]

Also no listing for EM1 on bendix site.

[mugen_ctr]

this is what happens when u buy a car made in the USA lol

I even went to autobarn, they even said theres no listing for such model... argh!!!!! only ek1 an ek4

[1590cc]

EM1 is same as EK4.. as to EJ8.. I am not sure..

[Mikecivic78]

EM1 is same as EK4.. as to EJ8.. I am not sure..

I think Em1/Ej8 have different calipers than jap made EKs.

[mugen_ctr]

one way i was told was to take out the pad, an draw the outline an they can match it, but id rather just go by part number an get %100 fitment

[civicVI]

just check with bendix online catalogue
VTI-R 1.6 have two different model "Akebono Caliper" DB1286 and "Aumitomo Caliper" DB1262
which one should i pick ?
mine one is EG6 brake setup

anyone know?
mine EBC Green almost gone
want to try some bendix

[quang]

hi mate, thats a million dollar question, as in aus they came out with both, i had the same problem, best way to do it is take the pad out and check it against both DB1286 and DB1262. i ended up having the DB1286. Otherwise if you really dont want to take it out, if you have a small ruler you can meaurse up certain aspects of the pad while its still in and compare it with the print out.

[trism]

yeah, if you cant see a brand on the caliper itself, youre best off matching it up with the picture.