PDA

View Full Version : ej8 sway bar options?



mugen_ctr
29-11-2009, 07:24 PM
Is there any sway bars that i can fit in the rear end of my ej8, as only the vtir/ctr only came with them, using only other honda parts, as im on a budget

jeffreymui
29-11-2009, 07:30 PM
ek9 rearsway?

mugen_ctr
29-11-2009, 07:32 PM
not many ek9 sway bars float around here, but i guess wen they show up, theyll show up

jeffreymui
29-11-2009, 07:36 PM
but i think u'll need asr if u get ek9 sway

mugen_ctr
29-11-2009, 07:41 PM
dam... i was hoping it would be a direct fitment, hmm... any other honda vehicles i can scavage from? right now the car feels very...well not very good handling around corners

vampzzz
29-11-2009, 08:18 PM
ek9 rear sway bar you'll need a subframe brace, or the sway bar will rip your subframe.

if you're on a budget go with an em1 or an ek4 rear sway bar, these won't rip your subframe.

i would just save up the extra money and buy the ek9 one with a beaks or asr brace. your car will handle much better with this mod.

jeffreymui
29-11-2009, 08:38 PM
i reckon this mod will be the best mod or the best 600 bux u gona spend on ur car

blabla
30-11-2009, 11:42 AM
Is there any sway bars that i can fit in the rear end of my ej8, as only the vtir/ctr only came with them, using only other honda parts, as im on a budget

em1 or ek vtir 14mm will fit. i have one on mine. if u go any bigger that when u need a sub frame. i think u can go up to 18 but pending condition of car. but sub frame is a good option check out whiteline they have a combo u can purchase whiteline products from pedders.

mugen_ctr
30-11-2009, 12:36 PM
thx guys, well i guess this would b the best option, for now, ill see if i can obtain an em1 sway bar, an later on upgrade to the asr subframe + itr/ctr sway bars