PDA

View Full Version : can you install airbags into an eg?



MacDiZZle
03-12-2009, 06:25 PM
like the title says just wondering if i can install the airbag system out of like a vti into my si

cheers!

JDM.Power
03-12-2009, 07:25 PM
si should have driver side airbag?? or maybe not?

bennjamin
03-12-2009, 07:40 PM
si should have driver side airbag?? or maybe not?

Only VTi came with drivers side airbag.

MacDiZZle
03-12-2009, 08:48 PM
so nobody knows if i can? really wanna know...

quangsuke
03-12-2009, 10:12 PM
im assuming you can. just change the steering wheel and install an SRS ECU.

bennjamin
03-12-2009, 10:23 PM
im assuming you can. just change the steering wheel and install an SRS ECU.


and the entire wiring system....both under dash and all sensors required etc.
not a cheap task. Why bother?

MacDiZZle
03-12-2009, 10:43 PM
and the entire wiring system....both under dash and all sensors required etc.
not a cheap task. Why bother?

hrmm i dont think so... ive been looking at the manual and it looks a bit easier then that... the srs system looks to run separate to the ecu

http://i954.photobucket.com/albums/ae26/MacDiZZle/airbag.jpg?t=1259843825

http://i954.photobucket.com/albums/ae26/MacDiZZle/airbag2.jpg?t=1259843872

As you can see it runs straight off the battery, through two under bonnet fuses which i recon would already be in there and then through two under dash fuses...

if im reading this correctly then i should only need the steering wheel and the small loom that goes back to the underbonnet fuse box. correct?

grifty
04-12-2009, 03:02 AM
what about the sensors?

EK1.6LCIV
04-12-2009, 09:09 AM
legally I can see you needing a nice engineers report to go with it

you're effectively tampering with the safety system, I'd at least give main roads in your area a call first before going into work

MacDiZZle
04-12-2009, 10:57 AM
what about the sensors?

Im not sure... i thought there were supposed to be sensors all around the car too but the manual doesn't mention it at all


legally I can see you needing a nice engineers report to go with it

you're effectively tampering with the safety system, I'd at least give main roads in your area a call first before going into work

Yer will do. good idea

MR-VTEC
04-12-2009, 03:23 PM
question is, why go to all the trouble and cost?

MacDiZZle
04-12-2009, 03:35 PM
giving the car to my girlfriend and she demands airbags... sigh* you know how women are

MR-VTEC
04-12-2009, 03:46 PM
yeah but if it's not done right it may well be more dangerous than not having one at all.

Anyway, yes you will need the sensors as well as they signal an impact to the control unit which sets it off. i'm sure ECU-MAN will know more ;)

bennjamin
04-12-2009, 04:55 PM
hrmm i dont think so... ive been looking at the manual and it looks a bit easier then that... the srs system looks to run separate to the ecu

if im reading this correctly then i should only need the steering wheel and the small loom that goes back to the underbonnet fuse box. correct?

lol dont correct me when you have no real idea :)

You need sensors too. And engineering. Etc.

It would be expensive , and more worthwhile to sell the car and buy a vti or later with a drivers side airbag.

Thats just IMO !

EK1.6LCIV
07-12-2009, 01:37 PM
I'd be very keen to see a diy on this topic, way to go if you pull it off

hisoka
07-12-2009, 01:53 PM
ever thought about selling the car and just buying a vti. hassle i know. but you get added features like cup holders (girls love this) , sunroof ( girls love this), rear disc brakes (girls love this), vtec (girls love this).

just adding food for thought.

MacDiZZle
07-12-2009, 09:26 PM
si has cup holders and rear disks... but i see what your saying.

will do a diy thread if its doable :thumbsup: