View Full Version : TB Thermal Gasket Question
mikka33
09-12-2009, 09:36 AM
Hey,
CAR: 04 EURO
When istalling the p2r thermal gasket on the TB, is it advisable to also use two original gaskets either side of the thermal gasket or use the thermal gasket on its own?
aaronng edit: No selling for newcomers, no selling allowed in this section.
PIC OF +06 Gasket
felixd
09-12-2009, 10:43 AM
what u mean uve ordered the wrong ones ? 04 - 06 euro are the same , pics will be helpful thanks cuz ive got it on my euro the thermal tb gasket
Crapdaz
09-12-2009, 10:53 AM
run them on it's own so it can make a flush seating between surfaces.
But the original gasket is prob caked on and might be a bit hard to rip off.
mikka33
09-12-2009, 11:01 AM
what u mean uve ordered the wrong ones ? 04 - 06 euro are the same , pics will be helpful thanks cuz ive got it on my euro the thermal tb gasket
Yeah one says 04 to 06 TSX the other says 06+ TSX.
One looks like it has the provision for the AIR IDLE thingy, an the other doesnt.
BELOW IS THE ONE I HAVE..
felixd
09-12-2009, 11:39 AM
2nd pc is the one i used :) so it should fit to ur TB perfectly. the 1st one is for euro r i think or civic SI
Crapdaz
09-12-2009, 01:46 PM
If you have the TB spacer make sure you got this one.
http://t0.gstatic.com/images?q=tbn:lQ6wwiHQWPld5M:http://cdn1.ioffer.com/img/item/121/397/333/oLI2.jpg
The one for Civic SI not TSX.
mikka33
09-12-2009, 01:57 PM
If you have the TB spacer make sure you got this one.
http://t0.gstatic.com/images?q=tbn:lQ6wwiHQWPld5M:http://cdn1.ioffer.com/img/item/121/397/333/oLI2.jpg
The one for Civic SI not TSX.
CHEERS
No spacer though, just the thermal gasket..
felixd
09-12-2009, 02:09 PM
CHEERS
No spacer though, just the thermal gasket..
itll be fine just the thermal gasket :D with spacer u mite experience space issue with the intake arms :) so this will be just right. doubt it ll make difference but it is re-useable :)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.