URGENT: Suspension Problem!!

[MWAKU]

Alright so installed 2 rear monoflex coilovers on my car, (non brand) and it was looking good

but just checked the struts and it was ****ed.

does anyone know how to solve this? it is at the moment on the highest setting on the right side, and 1.5 inches lower on the left hand side (the one where its sticking up even more). i have no idea why its doing this, the spring seems to short for the shock


this side is highest setting

http://i13.photobucket.com/albums/a285/mykulxD/SDC19362.jpg

this side is 1.5 inches lower then highest.

http://i13.photobucket.com/albums/a285/mykulxD/SDC19365.jpg

[Lukey]

they shouldnt be sticking out like that should they??

[MWAKU]

no they shouldn't thats why i made this thread, how to fix this

[ECU-MAN]

there is ment to be a washer on the bottom between the crome shaft and brass tube that has been slid over it. this washer then holds the bushes in place


do you get what I mean ?

[MWAKU]

Oh! cause ive got 2 washers left over, but there from the stock shocks. but im not sure what you mean as im not the one doing it. my friend will be back to finish it so yeah, he might understand you, but otherwise is there a picture around that you could show me please?

thanks

[THE_BIFF_EK_CIVIC]

Yep, Its quite similar to the top washer, just goes under the top hat.

Just take it all apart again and put one in each.

[ECU-MAN]

the washer will go where the green line is then 1 bush then the top mount, and the other bush and then the top washer and nut.

http://b16a2.kicks-ass.net/tech/SDC19362.jpg

[MWAKU]

so really i just have to put one more washer underneath the bumpstop and the top hat?

[Red_EG4]

so really i just have to put one more washer underneath the bumpstop and the top hat?

between the bump stop and the top hat.

[MWAKU]

ah ah ok ok thanks guys. everythings clear now hehe