How to Bleed Clutch fliud for B18C7 + Gearbox in EK4

[Louis - Type S]

Hi People,

Woke up this morning to find my clutch pedal was all the way to the floor, so if anyone can help, just need to know how to bleed the clutch fluid. Ive been told its a similar procces to bleeding brake fluid which i have done before with my mate.

Note that clutch is not stuffed as it is relativley new.


Any help would be greatly appreciated


Louis

[geeang]

Your clutch slave/master cylinder might be stuffed as well - common problem.

Check your clutch pedal to see if there is any fluid at the top of it, if there is you probably need to replace your clutch master cylinder altogether.

[SHOGUNOVDDRK]

Your clutch slave/master cylinder might be stuffed as well - common problem.

Could be this or it could also be the line.

[Louis - Type S]

Thanks guys,


will check it out

[Louis - Type S]

No fluid on the pedals and slave and clutch muster cylinder seem to be fine.

But i did find a tiny leak in the rubber clutch line just before it goes into the solid line.
Hopefully that is it.

[SHOGUNOVDDRK]

That should hopefully be the one :thumbsup:

[Louis - Type S]

Also just wanted to know if your are able to repair the standard rubber clutch line, just a temperary band aid fix before i can get a new braided line?