need help with spark plug lead

[ekcoupe]

hi guys,
i need some help my 1st cylinder spark plug lead keeps falling out whenever i go out for a drive. i have had a look inside it all seems fine nothing to make it pop it out also i compared it to the others and its all the same any help will be greatly appreciated.

thanks,

tim.

[ekcoupe]

comon guys i really need help, i just took it out for a drive to tweed n whenever it hits 3500 rpm i can here it pop out n i have to stop n put it back in. i poped it back in about 6 times in 1 hour i asked a mechanic just to have a quick look he is not to sure either please i really really need help.

[riruiz_88]

my guess it would either be the lead or the dizzy cover. try the faulty lead on a friends car and see if its loose like in your car. or try a friends lead and attach it to the dizzy, and see if its still loose. then just go from there, once you know what it is.

[ekcoupe]

thanks mate yeah i guess i will try that then

[Neesmo31]

The metal inside the lead that holds it onto either the distributor or the plug may be damaged. Have a look at both ends, try and bend them in so that they get a better grip. Also i found with some leads (on other cars) they get pressurised when you push them onto the plug or dissy, so you get a dentist pick and bend the rubber boot off so the pressure is relieved.

Id just reckon that the prongs are bent and not gripping properly.

[ekcoupe]

worked out problem spark plug was loose and it was pushing the lead out all good now