View Full Version : d series gearbox q
henrygiang
11-01-2010, 11:32 AM
hi guys
just a quick question
are all sohc d series gearboxes a straight swap over? or do things like driveshafts need to be changed too? looking at y4 and y8 in particular.
cheers
bennjamin
11-01-2010, 04:04 PM
all deseries boxes , 91-00 will suit your car.
EXCEPT the Si gearbox. It requires a different flywheel , clutch and driveshafts off the Si to suit.
dougie_504
11-01-2010, 08:01 PM
Ben,
So with my '94 Vti I (D16Y1) I can use any D-series GBox except the JDM ones?
So I can use it from the D15 series, or the D16A8 DOHC non-VTEC?
bennjamin
11-01-2010, 08:30 PM
Ben,
So with my '94 Vti I (D16Y1) I can use any D-series GBox except the JDM ones?
So I can use it from the D15 series, or the D16A8 DOHC non-VTEC?
sorry ! I should reiterate.
You CANNOT use any d16a8 gearbox. That is , off a EG5 Si. All other d hydraulic d series gearboxes 91-00 should be fine
dougie_504
14-01-2010, 03:04 AM
So just stick to any AUS d-series? Or just stick to the SOHC GBox's?
bennjamin
14-01-2010, 05:55 AM
Basically any civic , hydraulic , 91-00 will fit all the same.These are all SOHC engines
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.