Integra Type R Cluster Into Eg Civic *Harness*

[ICYOIL]

i just got a type r cluster, and wanted to know if there is anywhere i can buy a harness for plug and play into an eg?

also i know there are wiring diagrams on the net for it (i already have them) but im not keen on destroying my wiring for this id rather plug and play if i ever want to off load this to anyone it would be easy and not stuck with integra wiring in an eg and only an eg cluster

Thanks

[jon22]

its been done before, im not to sure how it works, but you definately cant plug and play, you'd have to rewire your stock harness i think, if it you engine is d series, i think you need also new module for your gearbox

[kcokla]

kyal,
i suggest look around on honda-tech.com

that site is an oyster for information regarding how to do things!

[ICYOIL]

yeh, ive looked around honda tech
thats were i found some one with a plug and play harness, the only thing was it was from years ago, and i dont thing the guy would remember where he got it from

just to clarify im not swapping out the hole dash, its only the cluster.. im modding it to fit into the eg dash.. its sounds like your on about that jon22

worst comes to worst, ill make my own
i just wanted to know if someone makes them, save me the hassel
because im not a master at electrics.. only at designing buildings..haha :P

[jon22]

ask a.c.s. drag aka jonston from crxaustralia, his done this a million times. he'll tell you everything you need to know in a sentence hahaha

[Boban]

just go to a wrecker, find a dc teg and cut off the plugs and solder them onto your wires, don't cut the eg plugs if you ever want to go back to eg cluster
As for wiring
http://i171.photobucket.com/albums/u286/80ban/DCintoEG.gif

Also a wery good diy IMO
http://www.civic-eg.com/viewtopic.php?t=7301&highlight=tow+hook+install

Good luck with it, i gave up and got me an eg6 cluster instead

[jords]

PM _CRX_ he has some spare dc2 cluster plugs.

If you are in sydney he can possibly help you to wire them up.

[ICYOIL]

just go to a wrecker, find a dc teg and cut off the plugs and solder them onto your wires, don't cut the eg plugs if you ever want to go back to eg cluster
As for wiring
http://i171.photobucket.com/albums/u286/80ban/DCintoEG.gif

Also a wery good diy IMO
http://www.civic-eg.com/viewtopic.php?t=7301&highlight=tow+hook+install

Good luck with it, i gave up and got me an eg6 cluster instead

thanks mate,
yeh i was about to give up and do the eg6 cluster, but i wanted something different.. i have not seen many egs rocking an integra cluster in oz so im going to be one

i first started off wanting an s2000 cluster, but gave up on that because i prefer needles


PM _CRX_ he has some spare dc2 cluster plugs.

If you are in sydney he can possibly help you to wire them up.

will do, thanks :thumbsup: