PDA

View Full Version : whiteline front and rear swaybars for DC5



r3ckless
12-01-2010, 04:36 PM
Im thinking of getting whiteline front and rear sway bars.

im not sure if i want the 24 or 22mm for the front... your opinion

toix
13-01-2010, 05:57 PM
larger/stiffer front sway bar => stiffer front end compared to rear => more understeer
larger/stiffer rear sway bar => stiffer rear end compared to front => more oversteer

both same stiffer (in terms of lateral load transfer not diameter) => stiffer car with same oversteer/understeer tendancy => different lateral load tranfer characteristics => tires operate in different sideslip/long.slip domain.. are they up to it? if not => lots of squealage:)

how does your car handle now and how do you want it to handle?

markis
13-01-2010, 06:00 PM
adjustable blade or fixed and what where you quoted. i was quoted around 430 delivered for adj blade

timofytit
14-01-2010, 03:19 PM
I would go a whiteline for the rear, and the EP3 type R one for the front.

r3ckless
14-01-2010, 08:34 PM
whys that, any justification.

timofytit
14-01-2010, 11:56 PM
whys that, any justification.

After my experience, and a few others, it works!

r3ckless
15-01-2010, 02:02 PM
wat about the endlinks.. i heard they wear out faster

timofytit
15-01-2010, 02:12 PM
That will always happen if you increase the strength of any swaybar. It's like an engine, if you flog the ring out of it, it should last not as long. If you go round corners faster, your tyres should wear out quicker.....