Gearboxes for B series!

[downinginc]

Hey all,

Having some trouble with our gearboxes.
My EK4 just killed her box ("S4C") and whilst out finding another for her, I stumbled across a "Y80" box apparently from a CRX


NOW this evening a possible problem of cable/hydraulic clutch systems not matching up arose at work.

According to the B16A FAQ (http://www.ozhonda.com/forum/showthread.php?t=14136) the only CRX released in australia is the Del Sol which is off a series two and thus is hydraulic.

After googling "Y80 Gearbox" an ad for a Y80 Gearbox (http://www.trademe.co.nz/Browse/Listing.aspx?id=61119495) came up and got my attention!

Questions are:

- where is a Y80 from? B18B Teg?
- is a Y80 hydraulic?
- can i use it without any custom fittings?

thanks in advance ^^

-mike-

[xntrik]

Y80 came with most of the B18 (B/C) in America and the JDM B18C SiR-G
Im no expert, but thats as far as I know.

And I am pretty sure the Y80 and also the S80 gearbox is hydraulic.
Correct me if I am wrong.

Hope this helps.


Quote:
"You can use any B-series transmission (cable or hydraulic) with any B-series block as long as you make sure that you use the correct clutch, flywheel, and intermediate shaft"

[xntrik]

I also found this on Team-Integra

S80 (JDM B16A)
1st 3.230
2nd 2.105
3rd 1.458
4th 1.107
5th 0.848
FD 4.400

Y80/S80 (B16B Spec R)
1st 3.230
2nd 2.105
3rd 1.458
4th 1.107
5th 0.848
FD 4.400

S80/Y80 (USDM B18B1)
1st 3.230
2nd 1.900
3rd 1.269
4th 0.966
5th 0.714
FD 4.266

S80 (JDM B18C w/Helical LSD)
1st 3.230
2nd 2.105
3rd 1.458
4th 1.034
5th 0.787
FD 4.785

Y80 (USDM B18C1)
1st 3.230
2nd 1.900
3rd 1.360
4th 1.034
5th 0.7878
FD 4.400

S80 (USDM B18C5 W/LSD)
1st 3.230
2nd 2.105
3rd 1.458
4th 1.107
5th 0.848
FD 4.400

S80/Y80 (JDM B18C SiR-G optional LSD)
1st 3.230
2nd 1.900
3rd 1.360
4th 1.034
5th 0.787
FD 4.400

[dougie_504]

Apparently the Y80 tranny came off the B18C1 in the '94-'01 Integra GS-R.

I'm pretty sure that all B-Series GBox's are compatible with all B-Series engines though. While you're at it you could get a Type R GBox.

I think it's hydraulic since the cable stuff ended in the early 90's didn't it?

[downinginc]

Cheers Xntric that's exactly what I needed!

[bennjamin]

to make it easier

anything from a local EK4 , EG3 ( del sol) , EM1 , DC4 , DC2 or ITR will 100% bolt up to your car dude.

[downinginc]

cheers ben,

hey i might need you for some handy spring change

you free-er now? i know chrissy/new years was busy for you