View Full Version : d16y7 Automatic gearbox cable?
beeza
19-01-2010, 02:05 PM
On my auto y4 there is an auto gearbox cable that runs from the gearbox and connects onto the throttle body rotor where the accelerator cable attaches too (on the opposite side):
http://i570.photobucket.com/albums/ss141/beeza9/100_1139.jpg
On the y7,there isn't a cable.I couldn't see one anywhere.
So my question is,does it have one?
If not,what system/setup does the y7 use?
:honda:
tseesinngwailo
19-01-2010, 03:07 PM
It should have a "kick-down" cable, was your original car/engine manual? only a throttlebody off an auto would have the bracket for the cable.
The idea is that when the throttle opens a certain amount, it will pull a lever on the auto box, forcing it to kick down a gear
The box should definately have the cable/lever
beeza
19-01-2010, 05:04 PM
The car has always been an auto.
I see,I understand what it is now,cheers.So it should definately have it.I'll check again tomorrow but I had real good look..
Thanks mate.
beeza
21-01-2010, 09:32 AM
Checked again,nothing..
Does anyone know forsure of the y7's auto box kick down cable set up?
Cheers :)
vinnY
21-01-2010, 10:01 AM
not some sort of weird cruise control thing is it?
beeza
21-01-2010, 10:32 AM
I'm not sure mate.
tseesinngwailo
21-01-2010, 10:38 AM
http://gallery.2dingos.com.au/albums/daintegraforsale/s24a_gearbox2.sized.jpg
I have this gearbox for sale and it's off a D15/16
you can see the kickdown cable coming up from the front (closest to the yellow power lead) which has a bracket that holds the cable, and a lever that goes into the gearbox
can you post any pics of your gearbox??
beeza
21-01-2010, 11:53 AM
Thanks mate!
Yeah there she is on yours.It's on Tims car (ekcoupe),so when I can I'll get some pics.
Thanks again!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.