dc2r brakes advice melbourne

[nerrrus]

hi

yes i have searched and i found that apparently project mu, or feroddos are the best pad to get for a dc2r but i still need more info please

i just wanted to know which pads people prefer to use for the front on a dc2r brand and part number please, my pads have just gone and i need to change them tomorow are bendix any good? i dont track my car. but id still like some decent brakes for street use.. also where about in melbourne is the best place to get the pads... autobarn i think only usally stock bendix ultimates

any help would very apreciated

thanks for your time people

[GSi_PSi]

just get good ol bendix.. good pads

[Zilli]

i think you should supplament any information you get here with a earch as this has been covered before and you will find great information.

I use Ferodo DS2500 front and rear. I track occasionally and in general wanted a really bitey pad. I have had no problems with them in terms of performance, and they are very stable and provide great feel on the track with no fade at all. I also have upgraded to Motul RBF600 fluid.

The downside of the pads is sometimes on extremely light brake applications i get squealing, and they produce a lot of dust...

now go search!

[anfo2gig]

alot of dust :) I have on my dc2r.
but yeh they sure are great pads (DS2500)

[ai_04]

I also have the DS2500's all around.

I recommend them. I also get the squealing on light braking and high dust factor too.

I'm more than happy with their performance coupled with braided lines all round and DBA 4000's.