1998 civic tyre pressure

[ageos]

Hi guys
I have a stock 1998 civic gli sedan and I was hoping someone knew the recommended tyre pressures for the front and back. Normally I would check the sticker on the drivers side but my car was recently involved in an accident and after I received it back all stickers on the drivers side were gone.

Also does anyone know where I could get these stickers replaced or If it;s even worth bothering?

[Raztaz]

well i use 32-33 on front and 30-31 on the back

[EK1.6LCIV]

I put 36 in all four of my 195/50/r15 setup

[Limbo]

check the tyre, each tyre has a different PSI rating.
Best to go with what the manufacturer recommends.

i usually go 1-2PSI lower

most of my tyres run on 38PSI

[Reloaded]

i use 36s front 34 back.

[flipfire]

Anywhere between 32-36 is fine for stock.

[DC2-PWR]

The tyres on my integra were scrubbing since I bought it, I thought my suspension was stuffed...

Yesturday I checked the tyre pressue, it reads 34psi. I filled up till 38psi on the front and since then the tyres did not scrub a bit :D.

So for me I reccomened 38psi

[~Sp33~]

The tyres on my integra were scrubbing since I bought it, I thought my suspension was stuffed...

Yesturday I checked the tyre pressue, it reads 34psi. I filled up till 38psi on the front and since then the tyres did not scrub a bit :D.

So for me I reccomened 38psi

Scrubbing on what? The fender? Or scrubbing due to a poor alignment?

[Mikecivic78]

Also does anyone know where I could get these stickers replaced or If it;s even worth bothering?

Whether its worth bothering is up to you, but if I were to buy your car and i noticed that the tyre size/pressure info sticker were missing i'd ask why it wasn't there. But hey, thats just me.