honda civic eg breeze installing gauges. help???

[thj822]

i want install a small rev tacho guage cos my breeze doesnt have one. i wann to know is it possible and simple to hook it up? im gonna mount it on the A pillar. does anyone know how i would go installing it? for example where the wires hook up and where? cheers

[vtecster]

y dont u just buy a 2nd hand cluster with revs and install plug n play much easier and neater.. just my opinion thou up to u

[thj822]

will it work? wouldnt the plugs at the back be different?

[kcokla]

y dont u just buy a 2nd hand cluster with revs and install plug n play much easier and neater.. just my opinion thou up to u

:thumbsup::thumbsup:

all eg clusters have the same plugs..
plug and play mate

save ur self the time and money

a cluster will cost u $50 from a wrecker, and swap the odo to keep your original k's!

[vtecster]

:thumbsup::thumbsup:

all eg clusters have the same plugs..
plug and play mate

save ur self the time and money

a cluster will cost u $50 from a wrecker, and swap the odo to keep your original k's!
:thumbsup:

[curtis265]

ooh, good info. I too was thinking about this.

what's the breeze redline?

[thj822]

cool thanks guys for replies =D

[Boban]

ooh, good info. I too was thinking about this.

what's the breeze redline?

pretty sure Gl, Gli and VEi redline from 6800 through to 8000
Si and Vti atart at 7200 through to 9000

However, if anyone wants to put a tacho, tap into the blue wire on the biggest plug (13-pin) for your signal and just run +ve and -ve of your choice, you can ether tap into some other wires on the cluster harness or elsewhere (like cd player for example)