dc2r rims drilled?

[YBJLS4]

can the adm dc2r rims be drilled to 4by100's? tempe tyres do redrilling but dont know if it would be safe.

[EG5]

you will have 8.5 holes on your wheels if you do that
Not recomended

[Lukey]

unless its from factory like it, i wouldnt do it

[MWAKU]

just go buy

Enkei NT03 Silver or Enkei Tarmac Black

look similar :P

what happ 2 redrill the 96 R rims?

[vinnY]

he goes adm lol :P

edit; i take it back, i just can't read :p

[MWAKU]

he goes adm lol :P

[xntrik]

I think you can get replicas from rota's or another company that look very similar with 4x100.


4x114.3 drilled with 4x100 is okay as the space given between each hole is decent.
Still not reccomended tho.


But 5x114.3 drilled to 4x100 not okay.

[Zilli]

dont think it's doable, and you'd find it hard to get a shop to do that for you anyway i'd say

[tiksie]

This is TT we're talking about lol.

[Zilli]

:-)...

[IEVAQ8]

go buy suzuki ignis 15's which look identical and are 4x100

[YBJLS4]

its going on a suzuki

[LLS]

lol...

[xntrik]

Im so confused.

[sretocz]

The rims you want are ROTA R SPEC, which come in the 4x100 stud pattern and look almost identical to the type r rims. Hope that helps.

[Zilli]

its going on a suzuki

if it is going on a suzuki then get the ignis wheels... incredibly similar...

[Limbo]

as yonas said it will give you one half drilled hole.
On rotors its not too bad cos they don't get banged, but the continual banging on rims due to bumps etc will crack them in no time.

Certainly a danger hazard. Try explaining it to the insurance company when you loose control due to a rim cracking.....

would be doable on the 4x114 are there's space for it and so long as its done properly should be fine