PDA

View Full Version : [CL9] legal wheel size for euro in victoria?


SHOGUN
27-01-2010, 07:56 PM
as the thread title states. thank you!
euro_tr4sh
27-01-2010, 08:33 PM
i beleive its 2 inch's bigger in diameter and 1 inch in width
tknova
28-01-2010, 07:42 PM
I'm under the impression, that if the load rating on the tire matches or is better than stock, you can have any size wheel you like.
kimnkk
28-01-2010, 08:02 PM
Yeah pretty sure the rim size is not relevant. The rolling diameter has to be within +/- 15mm of the original one and the load rating same or higher. You can go from 15" steelies to 20" if you want, as long as the rolling diameter, with the tyre on, is within 15mm of the original setup.
tknova
28-01-2010, 09:54 PM
For once! Size doesn't matter!! lol
tony1234
29-01-2010, 06:27 AM
euro tr4sh is right.Legally you can only go +2 from stock.So if you have std.Euro with 16s max.you can go is 18s
tknova
29-01-2010, 07:10 AM
euro tr4sh is right.Legally you can only go +2 from stock.So if you have std.Euro with 16s max.you can go is 18s

Maybe in NSW, but in Victoria. It's load rating.
tony1234
29-01-2010, 07:29 AM
Maybe in NSW, but in Victoria. It's load rating.
Of course load rating must be same or higher as well
kimnkk
29-01-2010, 10:17 AM
Not according to vicroads: http://www.vicroads.vic.gov.au/NR/rdonlyres/CC48FC10-4D57-4F04-82E1-3BD72EF88340/0/VSI8.pdf

You're allowed a 1" increase in width and rim size doesn't matter, only the rolling diameter with tyres on.