View Full Version : Licence plate lights not working
TheSaint
30-01-2010, 05:31 PM
i just went to test out an led in my licence plate lights and found that they dont work all together
when are they suppose to come on? i tried turning my lights on and off, braking, trying the same with the car on and off and nothing
the led bulb at least is working so i know its not the bulbs ... and ideas on how to fix this?
EG8 Civic Sedan btw
kcokla
30-01-2010, 06:11 PM
obviously you've tested the bulbs, my guess is that when you put the led's in, the metal rods wernt touching the metal parts, re-check them.
other than that - your sure they were working before you tried to change them?
grifty
30-01-2010, 06:29 PM
also test to see if there is any power going to the terminals with a digital mulitmeter
TheSaint
30-01-2010, 07:35 PM
cant be sure that they were working in the first place ... i dont think it was anything i did today... will try and borrow a multimeter tonight to test them
do they have their own fuse somewhere?
flipfire
30-01-2010, 07:42 PM
Should come on when you turn on the parkers or headlights.
Did you try turning it over? The polarity has to be right with LED's
TheSaint
30-01-2010, 08:38 PM
hrm didnt try changing the polarity .. maybe both of my stocks are blown and i need to put the led in using both ways
ill give it a shot wen i get home later and see if it helps
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.