View Full Version : Tunning required for bigger TB?
bigbaby0223
05-02-2010, 01:56 AM
Been thinking about upgrading to a bigger throttle body and a P2R inlet plenum box for the EP3,is tuning for these mods needed? Thanks guys!:D
dougie_504
05-02-2010, 02:48 AM
Been thinking about upgrading to a bigger throttle body and a P2R inlet plenum box for the EP3,is tuning for these mods needed? Thanks guys!:D
Have you done head work? I/H/E?
JasonGilholme
05-02-2010, 05:48 AM
it would still run without being tuned, but to get the full benefit a tune wouldn't hurt at all.
dougie_504
05-02-2010, 08:19 AM
But to get the full benefit surely you should build the head.
You don't really need a bigger TB unless the engine needs to breathe a lot more (IE post head-work).
JasonGilholme
05-02-2010, 08:22 AM
Not always, vtec engines love to breathe. and a small increase above stock can give a nice result. If you go too big though you can run into troubles with low RPM bogging etc.
if you're going for a BIG TB then you'd assume headwork has/will be done. :thumbsup:
bigbaby0223
05-02-2010, 08:56 AM
I have done my intake and a catback exhaust is on the way. Not thinking about a hard core TB upgrade, looking at something like the JDMyard TB porting. What does everyone think of the P2R plenum box?
http://www.corsportusa.com/store/catalog/images/p2r-303.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.