View Full Version : d16y1 ecu selection??
Aydin
22-02-2010, 03:20 AM
hey guys ive got a eg d16y1 vtec with an upgraded cam, cam gear, p2r fuel rail, s.a.r.d fuel regulater, 550hp walbro fuel pump, 4-2-1 header with 2 inch pipeing, blox intake manifold, type r t/b 62mm, custom 2.5inch long ram intake with a blox velocity stacker. which ecu's are compatable with my set up??
hey guys ive got a eg d16y1 vtec with an upgraded cam, cam gear, p2r fuel rail, s.a.r.d fuel regulater, 550hp walbro fuel pump, 4-2-1 header with 2 inch pipeing, blox intake manifold, type r t/b 62mm, custom 2.5inch long ram intake with a blox velocity stacker. which ecu's are compatable with my set up??
im tossing between hondata s200-s300 or a power fc...
Aydin
22-02-2010, 03:52 AM
yeh i was thinking along those lines has anyone tuned there d16y with a hondata or a power fc??
cheers
hitoriko
22-02-2010, 05:39 AM
VAFC2, piggy back but thats all you'll need
good luck finiding a power FC for a d-series
well there goes the power fc option :P
Mugen_R
22-02-2010, 08:10 AM
hondata s100 or s200 would be fine
Lukezen27
23-02-2010, 06:19 PM
hey guys ive got a eg d16y1 vtec with an upgraded cam, cam gear, p2r fuel rail, s.a.r.d fuel regulater, 550hp walbro fuel pump, 4-2-1 header with 2 inch pipeing, blox intake manifold, type r t/b 62mm, custom 2.5inch long ram intake with a blox velocity stacker. which ecu's are compatable with my set up??
The most compatible is the one you've already got haha Scored......
You have a P28 odb1 ECU a good very easy ECU to chip
Hondata S100 $300-400 + socket costs
If you want map hot swap you'll need the far more costly S300
$500-600 tune
im tossing between hondata s200-s300 or a power fc...
They don't make Hondata S200 anymore
beeza
23-02-2010, 07:00 PM
What cam are U running?
So it hasn't been tuned yet yeah?
I think 2.25" exhaust would be better suited.
Man,so nice to see a d-series build,love ya avatar!!
How's the low end torque/response,any lag with the bigger TB and IM?
lookingforboost
24-02-2010, 08:39 AM
my turbo D runs a EMS 4424 cant fault it ;)
Aydin
25-02-2010, 05:05 AM
thanks guys the touqe is still there and ive gained a lot up high im not sure what cam it is becouse it was alreedy instaled in the motor when i got it. i think il go with a hondata s300 where can i find one???
beeza
25-02-2010, 09:56 AM
What cam are U running?
So it hasn't been tuned yet yeah?
I think 2.25" exhaust would be better suited.
Man,so nice to see a d-series build,love ya avatar!!
How's the low end torque/response,any lag with the bigger TB and IM?
Again,cheers.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.