Things you're planning on buying?

[pieee]

As the title says just curious as to see what everyones soon to come mods and or items will be =]

http://i628.photobucket.com/albums/uu4/hanzoracing/Generic/CivicFogLight2.jpg

[WA-EG]

well, just bought some Type R brakes to fit and convert my rear drums. Soon after that is some headers and exhaust. last but not least some BC or Tien coil overs. after i recover from that, some semi slicks for a little track work. This should all be within next 6 months.

hoping then for a street drivable cam set, and power FC or similar for tuning.

should make for some fun times ahead.

[TheSaint]

lol see my build thread in my sig for my shopping list =)

[hitoriko]

i just got my 4pt brace today i have alot of parts at the moment just need them fitted!

[TheSaint]

ooooo im ordering my brace 2night

let me know how u go fitting it =)

[beeza]

Got some plans.

Install the stage 1 bisi cam.

Bore the TB from 56mm to 60mm and port match the IM.

Upgrade the exhaust from 2" to 2.25".Just need to buy a 2.25" hi flow cat because my x-force twin loop is 2.25",the collector on the x-force headers is 2.32".

All this will cost:

TB and IM porting 400 (inc. postage)
cat 60
piping and install 180-230

Unsure if I should run a resonator at this point :)


Would love to get head work done.Will cost $1000...and port work on IM,the runners and port matched to the head,another $400-$500.U cant run a skunk2 IM on the y4.

[ekcoupe]

installing ebay headers tomorrow:D

[beeza]

installing ebay headers tomorrow:D

And brake fuild flush.

Dot 4 :thumbsup:

[ekcoupe]

And brake fuild flush.

Dot 4 :thumbsup:

oh right forgot:p

[TheSaint]

i dont think boring ur TB will help much on D series

alot of ppl get the same figures from stock than bored or aftermarket


Got some plans.

Install the stage 1 bisi cam.

Bore the TB from 56mm to 60mm and port match the IM.

Upgrade the exhaust from 2" to 2.25".Just need to buy a 2.25" hi flow cat because my x-force twin loop is 2.25",the collector on the x-force headers is 2.32".

All this will cost:

TB and IM porting 400 (inc. postage)
cat 60
piping and install 180-230

Unsure if I should run a resonator at this point :)


Would love to get head work done.Will cost $1000...and port work on IM,the runners and port matched to the head,another $400-$500.U cant run a skunk2 IM on the y4.

[hitoriko]

the brace looks great but my car is at my mechanics so wont get to fit this week it seems

BTW whats the skunk2 shifter like?

[beeza]

i dont think boring ur TB will help much on D series

alot of ppl get the same figures from stock than bored or aftermarket

I will do it anyways.bore the TB out to 60mm and port match the IM.

Certainly it can only benefit.

[geeang]

This thread is like a thieve's Christmas shopping list.

[beeza]

LOL

THe whole bloody website is then!

[TheSaint]

port match = win

skunk2 shift knob is sex - %100 better

i think my missus pandora charm scrached it tho =(

[hitoriko]

i was lookiing at the ARC TITANIUM SHIFT KNOB one for mine though :P

[jks24]

Hope to get exhaust and headers in the next 4 or so months. Suspension is basically finished prob will get camber kit tho. Also need to get tyres on my new rims :)

Then in a years time when I get my opens I will be seriously considering a b18cr swap

[jks24]

port match = win

skunk2 shift knob is sex - %100 better

i think my missus pandora charm scrached it tho =(

I thought the skunk2 knob had a special coating to resist scratching.... I've had mine for like 4 months now hit it with my ring everyday and still hasn't scratched it.

[ekcoupe]

Hope to get exhaust and headers in the next 4 or so months. Suspension is basically finished prob will get camber kit tho. Also need to get tyres on my new rims :)

Then in a years time when I get my opens I will be seriously considering a b18cr swap

sounds good josh,

can u do a engine swap when ur on ur p's?

[WA-EG]

port match = win

skunk2 shift knob is sex - %100 better

i think my missus pandora charm scrached it tho =(

oooo ooo i forgot to mention. Mfactory short shifter, gear knob and bushing kit. :-D although having seen couple of pictures of the skunk2 gear knob i am kinda torn between the two now.

ARC titanium shift knobs are sexy too. dammit

[TheSaint]

I thought the skunk2 knob had a special coating to resist scratching.... I've had mine for like 4 months now hit it with my ring everyday and still hasn't scratched it.

so did i =/

JDM yard have a nice shift knob as well ... similar to skunk2 but cheaper =)

[EK1.6LCIV]

just labour at this point in time

JDMYard shift knob is one of the best I've had in the car, good surface finish

[hitoriko]

yeah thinking arc for me everyone goes skunk2

[TheSaint]

yeah thinking arc for me everyone goes skunk2

there is a reason for this lol

[EDracer]

I will do it anyways.bore the TB out to 60mm and port match the IM.

Certainly it can only benefit.


i found on "D-Series.org" that the LS integra TB fits directly onto the D16a8 and is 60mm?

can anyone confirm this, might be a better option for you

[jks24]

sounds good josh,

can u do a engine swap when ur on ur p's?

B16 ------> b18 will need to be mod plated enginered etc so no. I won't be in any great rush though, if I don't do conversion I will keep the em1 prob a year or so longer and buy a dc5r. Always wanted and loved integra type r

[Raztaz]

A new Magic Tree air refresher.
:)

[jks24]

Lol^^

Actually mine is nearly empty

[pieee]

A new Magic Tree air refresher.
:)

Love it, hahaha.

[TheSaint]

mines under the seat sumwer lol

[WA-EG]

A new Magic Tree air refresher.
:)

thats the first mod i made. Driver door seal was letting in water so car was smelling a little iffy.

[TheSaint]

yeah i need to drill drain holes in more doors ... the driver side is leaving a rust stain on the kiker panel ... so i think theres some rotten leaves etc in there that need to b cleaned out

[WA-EG]

yeah i need to drill drain holes in more doors ... the driver side is leaving a rust stain on the kiker panel ... so i think theres some rotten leaves etc in there that need to b cleaned out

i found out the hard way on my maiden voyage through the local carwash. :-S had to pull the drivers seat and carpets out and put them in the sun. nothing like pressurised water getter blown into your car to make your day

[ekcoupe]

B16 ------> b18 will need to be mod plated enginered etc so no. I won't be in any great rush though, if I don't do conversion I will keep the em1 prob a year or so longer and buy a dc5r. Always wanted and loved integra type r

so im guessing that i cant do my conversion from d16 to a b18c while on my p's?

[jks24]

so im guessing that i cant do my conversion from d16 to a b18c while on my p's?

Not legally because goin from 1.6 ----> 1.8 could get away with b16 tho I'm pretty sure

[ekcoupe]

Not legally because goin from 1.6 ----> 1.8 could get away with b16 tho I'm pretty sure

hopefully i can, ill have to check it out:D

thanks

[jks24]

hopefully i can, ill have to check it out:D

thanks

Isn't your car auto?

[grifty]

Isn't your car auto?

you can always convert to manual?

[grifty]

im planning to buy a new ICM so my car stops f**king stalling

[jks24]

you can always convert to manual?

Yeh I know...was just asking as I dont see many on here goin auto to manual

[ekcoupe]

Isn't your car auto?

yep auto.

would be more fun to drive manual thats mostly why i want to do this swap thinking of getting a b16b

[jks24]

yep auto.

would be more fun to drive manual thats mostly why i want to do this swap thinking of getting a b16b

For the money you will pay for a b16b mate you mayaswell budget a tad more and go with the b18cr. I say this because I thought exactly the same as you at one stage:thumbsup:

[hitoriko]

auto to manual conversions are a prick to do i dont care what anyone says!

[jks24]

auto to manual conversions are a prick to do i dont care what anyone says!

Prob why I don't see them to often. Takes to much effort time and money?

[ekcoupe]

For the money you will pay for a b16b mate you mayaswell budget a tad more and go with the b18cr. I say this because I thought exactly the same as you at one stage:thumbsup:

though i couldnt do the 1.8 b18 swap on ur p's.

u have a b16a right, how do they go?

[jks24]

though i couldnt do the 1.8 b18 swap on ur p's.

u have a b16a right, how do they go?

Oh you want to do the swap before you get your opens, in that case you can't legally run a b18 :(

yes b16, goes very well for a 1.6 n/a engine :) fun to drive and still good on fuel.

[ekcoupe]

Oh you want to do the swap before you get your opens, in that case you can't legally run a b18 :(

yes b16, goes very well for a 1.6 n/a engine :) fun to drive and still good on fuel.

yeah im planning to do it in a year or two.

well ill consider getting the b16a ill just have too look more into it:p

[hitoriko]

Oh you want to do the swap before you get your opens, in that case you can't legally run a b18 :(

yes b16, goes very well for a 1.6 n/a engine :) fun to drive and still good on fuel.


heaven forbid you do something illegal on your p's :P

[jks24]

heaven forbid you do something illegal on your p's :P

Well the chances of gettn caught would prob be slim. Comes down to if you want to takethe risk. I would hate to be in a crash, kill someone or seriously injure them then have insurance/cops etc discover that you were not legally meant to be driving the car.

Maybe I'm to paranoid though lol :p