fujitsubo header any good...

[gravias]

hello guys.. i find this header at a good price and i am thinking to buy it..its with 2.5 collector and my car is an ek4 (b16a2)...is anybody here who run this header and he can give me some advise about the power gains quality etc.. http://www.risingsunperformance.nl/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_54_14_1.jpg .. thanks..:thumbsup:

[gravias]

i found info about this header... its really good and power gains its about 7hp...now i am in dellima what collector to go 2.25'' or 2.5''?? my plans are i/h/e and ctr or buddy club III cams..

[DreadAngel]

Fujitsubo Official Site Direct Linkage yO :) (http://www.fujitsubo.co.jp/prods/detail/000000000000001212/00000000000000002669/00000166)

[dougie_504]

Either 2.25" or 2.36"/60mm

[6thgear]

fujitsubo is the shiznit. i'd say somewhat same league as mugen...header design seems somewhat similar. great quality stuff

if you're going bc3, i think 2.5 that you have already should be ok?

[DreadAngel]

Little birdies tell me FGK manufacturers headers for several big tuners then rebrand them and add their awesome tax ;)

[dougie_504]

I've heard that's what Bisimoto, Skunk2R and Buddy Club all do - have something built in Taiwan and just put a name on it before multiplying the price or something lol

[Sir_vtec]

Bisimoto is poor quality, figment is poor and power loss as where due to fitment.

[VT3C]

Little birdies tell me FGK manufacturers headers for several big tuners then rebrand them and add their awesome tax ;)

I found a 'JASMA' 4-2-1 header and contacted JASMA with the serial number and it was actually a TANABE header.. when at Up-Garage in Tokyo I found an almost identical header and it was 'FGK' (Fujitsubo).. I am happy with my TANABE but it only has 2" collector size - to suit stock EG6/EK4 Cats.

[dougie_504]

2" header is fine, it will still flow better and if you just get a better cat and cat-back you'll see nice gains.

My brother has 2" XForce 4-2-1 header connected to a 2.5" Magnaflow hi-flow cat and 2.5" Fujitsubo Powergetter. Goes great.