door cards

[civtec]

hey i know it sounds easy but i just dont want 2 wreck my power window switch wires or watever is behind there i have the rest of it off easy just want 2 know if the door handle part just pops off or do you have 2 unsrew or unplug something thanx

[Dr4g0n]

if you have an eg, there is a screw where the door opening lever is, a screw in the door grab part and a plastic screw below the a pillar on the door panel (open the door to see it). Undo these and then slide the door opening lever to the left (for the drivers side...for the passenger side, slide to the right). once the door opening lever has popped out, undo the plastic clip that holds the door opening rod to the lever (dont break it). Now all you need to do is go around the edge and pull on the door trim lightly but firmly to pop out the clips that hold it on. then in an upwards lifting motion and manouvering, you can take the door trims off the door. there will be harnesses for the power window switch which you gotta unplug (it's abit tricky).

[civtec]

thanx heaps mate got it no worries

[wynode]

Check the DIY forum as I did a DIY on how to install a stereo into an EG and it has some pics on taking the door handle and door trim off :)