How to....

[X-ray Spex]

Replace the front bumper on DA9? Been trying for about an hour now....

[A-man]

remove the front indicators 1 screw and then pull one side out and slide it out of the locator.

remove the screws in the wheel arch 2 on each side, then inside where the indicators were removed there is 2 ( 4 in total) 12mm bolt heads that hold the reinforcing bar up. remove them.

depending on the condition of ur car (for example not mine) underneath there sometimes are a few bolts there to remove to.

[X-ray Spex]

Thankyou....it was the bolts underneath i couldn't locate....new bumper fit perfect :)