PDA

View Full Version : Central Locking



SuperJDM.
23-03-2010, 07:29 PM
Alright guys somethings wrong with my Central locking when i first got the car it was working fine but then it went funny on me. First when you press unlock it makes a "doot doot" sound then it makes a soft click then a loud click thats when i know the doors unlocked.

Now when i press unlock it goes "doot doot" and makes a soft click and the door wont open :(. So now i have to go "doot doot" and unlock it by hand LOL or else the alarm goes ape. If i turn the car on and leave it there or go for a little drive and come back it works fine. "doot doot" "soft click loud click".

Although i think the locking works all the time. Anyone know what the problem is?

nam.qhc
23-03-2010, 07:51 PM
have you tried openin the door up and look inside? there might b something in the way.. hence why after driving.. that part might loosen up and works.. but wen stationary it gets block again.. give that a try? :P

ajbm
23-03-2010, 10:12 PM
open ur door trim and check the central locking mechanism, often times it becomes loose, you just need to tighten the adjust it to work.
good luck!

dahondr98
23-03-2010, 10:22 PM
Could be the locking mechanism getting a bit stiff, due to lack of lubrication – pull the door trim off and check it out.

shebangs
23-03-2010, 10:35 PM
I had this happen to me. I popped the door trim off, and sprayed WD40 into behind lock on the door. When you pull the door trim off you'll see the open/close switch that moves, follow the two metal pieces that come off off it then spray the WD40 into that. Then open/close the door a bunch of times (to remove the dirt) spray it again and it'll be fine for another couple years.

SuperJDM.
24-03-2010, 07:06 AM
Thanks guys ill sus it out today.