S2000 seats on ek4 rails

[djt]

Would s2000 seats bolt on directly to ek4 rails?

[sovereignty]

no they wont fit. apparently u need to modify to fit

[vuongkong]

what you will need to do is transfer the seat pan over, and the s2k seats will look like stock. search it online mate. done many times. :)

[niiCk]

what you will need to do is transfer the seat pan over, and the s2k seats will look like stock. search it online mate. done many times. :)

werd!:thumbsup:

[djt]

What?? so lost with what ur saying.. so they wont fit?

[niiCk]

they can if you change the seat pan over from the EK seats to the S2000 seats..

the seat pan is the metal base on the bottom of the seat. you need to take it off by removing the pins which hold the fabric to the seat pan, unbolt the screws and off it goes then replace it onto the s2000 seats in the same manner..then you'd have your EK seat pan + rails on the s2000 seats..

[djt]

Ohh, ok so does the ek seat pan fit directly to the s200 seat or u need some diy modifying?

[niiCk]

uhh, that im unsure of. but im sure it'll just sit nicely at the bottom of the s2k seats.
if shuld be fine.

[djt]

ok, thanks, seems hard but i'll give it a go.

cheers..