Timing marks D15B4

[-D15B4-]

G'day
Recently doing a head on a D15b4
Anyway there are no painted marks on the balancer for TDC.
I found a few lines pressed on the balancer. like this.

----I I I------I I------
.......1............2

After scratching the balancer i found.
The middle mark is red (1) and the very last one white (2).

Now i guess that the white is TDC and the red is 'so so' deg. BTDC
Can anyone confirm this
I have a feeling i have read about the red and white marks somewhere.
I'll have to check that.

Cheers

Just found these
BELT POSITIONING (http://media.honda.co.uk/car/owner/media/manuals/ConcertoManual/62sk301/5-31.pdf)
RED MARKS (http://media.honda.co.uk/car/owner/media/manuals/ConcertoManual/62sk301/5-21.pdf)



All the timing marks lined up but i had no luck firing.
No cough, splatter nothing.
When i turned the balancer another 360deg. the marks didn't line (cam to crank)
The cam gear was 180deg. out

Any help would be much appreciated.
Cheers

[ECU-MAN]

the red mark is the timing mark, the single white mark is TDC,

I always use the markings on the block and timing belt gear behind the timing belt cover

what balancer are you talking about ? harmonic ??

[-D15B4-]

Yeah harmonic.
I never knew this motor has markings on the block.
My manual said to re assemble the harmonic balancer end lower timing cover.


Cheers