View Full Version : s2k start button light led help
VAT05
29-03-2010, 09:06 AM
hey guys,
installed the button into my car sucessfully. the way its wired up is
pin 1- signal out 12v
pin 2- power igp
pin 3- ground
pin 4- not in use
pin 5- not in use
only problem is the button doesnt light up. am i missing something?
i followed a guide from ozhonda.
any ideas?
SHU-ES1
29-03-2010, 03:35 PM
is there meant to be a light in the first place? if you've wired it all up correctly, it should light up. mine doesn't have a light either?
VAT05
29-03-2010, 04:01 PM
im prety sure there is a light. the guide i followed had one. and so did a few other guides on google
VAT05
06-04-2010, 09:58 AM
anyone?
ECU-MAN
06-04-2010, 10:45 AM
http://www.ozhonda.com/forum/showthread.php?42680-DIY-S2000-start-button-into-97-Prelude&highlight=s2000
VAT05
06-04-2010, 11:03 AM
hey mate,
yours is the one i followed. no light but?
ECU-MAN
06-04-2010, 11:12 AM
then the light bulb in your switch is blown
VAT05
06-04-2010, 05:14 PM
any ideas on how to open it? or what sort of bulb it is?
VAT05
06-04-2010, 11:47 PM
did abit of a google found the following link fyi. http://www.s2ki.com/forums/index.php?showtopic=601913&st=0
the bulb i need is a 35851-S2A-003. do you guys reckon any honda spare parts would carry them?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.