View Full Version : K24 or k20
jdm_kid23
30-03-2010, 02:50 AM
hey guys i wanted to know which engine would run better if dropped into a dc2 a k20 or k24 thank you guys :)
r3ckless
30-03-2010, 07:53 AM
is tehre any reason why MNC... i really find posts like yours are pointless!
THe OP has received any answer from another member, yet they havn't given any justification to that answer.
xntrik
30-03-2010, 09:49 AM
K24 = More Torque / Less Revs.
K20 = More Revs / Less Torque.
K20 = More expensive.
K24 = Less expensive.
Up to you, torque or revs.
Huge price difference though. (if JDM K20A)
IEVAQ8
30-03-2010, 10:05 AM
k24 and then add some cams, retainers and valve springs with the money u save from k20 and u have the same power same rev's but a shit loads more torque...
jdm_kid23
30-03-2010, 10:09 AM
hey yeh i was thinking k24 cause u get alot more tourqe and a few mods here and there you got the same power thnks alot for the responses guys
45SET
30-03-2010, 10:55 AM
K24/20 farker!!!
Perry
30-03-2010, 11:04 AM
I havent driven a manual K24. But a K20 will be sufficent enough for daily use and occasional track days.
_paybk
30-03-2010, 08:25 PM
k24 baby!!!!!!!!
FLICK
30-03-2010, 08:39 PM
k24 and then add some cams, retainers and valve springs with the money u save from k20 and u have the same power same rev's but a shit loads more torque...
Thats Right! Most K20 owners i know usually end up getting a K24. Go figure. K24's are cheap. Add the right retainers,valves spring,some mild cams and you will shit all over a K20. Yes K20's will always rev harder, around the track the k20 is harder to drive than a k24. Here's an example. Last turn at Wakefield Pk a k20 has to shift back to second and a k24 can stay in 3rd. There is no replacement for displacement. Dont get me wrong a JDM K20 is quality but expensive. :thumbsup:
_bORdO_
30-03-2010, 10:49 PM
how much more lbs of tq does a k24 have to the k20 anyone?
also
Tom, you said a k24 would have same revs with those few upgrades - can you please explain how? im noob...
LAGOOT
31-03-2010, 09:06 AM
Thats Right! Most K20 owners i know usually end up getting a K24. Go figure. K24's are cheap. Add the right retainers,valves spring,some mild cams and you will shit all over a K20. Yes K20's will always rev harder, around the track the k20 is harder to drive than a k24. Here's an example. Last turn at Wakefield Pk a k20 has to shift back to second and a k24 can stay in 3rd. There is no replacement for displacement. Dont get me wrong a JDM K20 is quality but expensive. :thumbsup:
Hit the nail on the head right there!
compared to how much a K20 goes for nowadays, a K24 is a better option for you! Extra displacement + some mild mods = win!
IEVAQ8
03-04-2010, 08:53 AM
how much more lbs of tq does a k24 have to the k20 anyone?
also
Tom, you said a k24 would have same revs with those few upgrades - can you please explain how? im noob...
well, once it has cams and the rest of the head gear, its a lot stronger and its worth reving higher as you know the cams will continue to make the power, plus with a tunable ecu, u can do what u want providing the engine likes what ur doing...lol
_bORdO_
04-04-2010, 12:42 PM
Ohh i understand now...
cheers for the explanation.
danielj
04-04-2010, 03:15 PM
what's the price difference between the two??
FLICK
04-04-2010, 03:28 PM
what's the price difference between the two??
Jdmk20 and K24? difference is about 3-5K, maybe more depending who or where you buy from and what you want, eg. Gearbox, loom so it all varies. I would dare say in the end the difference would be somewhere in between 3 and 5k
DRHnda for all your k needs
FLICK
04-04-2010, 03:44 PM
DRHnda for all your k needs
DRHONDA. Zco hurry up and get your EK there. He is waiting for you...
K24 FTW! specially in DC2 chasis.
+1 DRHONDA for K series engine rebuild
YBOOST
04-04-2010, 05:55 PM
hey my dc2/k20 aint too shabby lol
FLICK
04-04-2010, 06:26 PM
hey my dc2/k20 aint too shabby lol
Of course not. Jdmk20's are awesome. I've driven one and I love em. But nothing feels better, more aggressive and response than a k24 hands down. I've driven 10 secs skylines and I'll be honest and say that the raw power and sound of a built k24 is exhilarating. Your dc2 is one of the best alongside nelson's k20 dc2 are fine examples of jdmk20's here in australia.
Yours is fast boss hehehe
Mullensxxx
05-04-2010, 07:14 PM
im curious why the Euro R was given a k20a if k24's are so much 'better', sure both have their pros and cons, end of the day every 1 is gonna be biast to what they like, sure there is no replacment for displacement
then again im no expert and will never claim to be, but k20 can be as cheap if u know where to look
FLICK
05-04-2010, 07:23 PM
im curious why the Euro R was given a k20a if k24's are so much 'better', sure both have their pros and cons, end of the day every 1 is gonna be biast to what they like, sure there is no replacment for displacement, but i know what id buy ;)
Because from factory the k20a is a performance whereas the k24 isn't. That doesn't mean you can't modify the internals of k24. And when you do the k24 becomes something k20a cannot match. It has been proven worldwide that the k24 is the engine of choice for most genres of Motorsport, drag racing or circuit.
Mullensxxx
05-04-2010, 07:28 PM
like i was implying k20 is the better stock motor, but like anything bigger disp and money is a formula to sucess, and i feel that the manority will be that serious that they will be building fully built drag/ track motors
so i guess it really comes down to what u wanna achieve
FLICK
05-04-2010, 07:32 PM
like i was implying k20 is the better stock motor, but like anything bigger disp and money is a formula to sucess
Well everyone knows the K20a is a better stock motor than the k24 hence why there 3 times more expensive. I thought you were implying that a k24 will never be as good as the k20.
Mullensxxx
05-04-2010, 07:39 PM
not at all, if ur aims were super lap and getting best track times its clear what u would choose, just every 1 making the k20 sound like its not even worth looking at
90LAN
05-04-2010, 07:45 PM
another dreamers question imo on ozhonda
just to also add a stock motor is sometimes better than a built motor
unless the engine builder knows what he is doing
mocchi
05-04-2010, 08:46 PM
yeah, some ppl want less risk in their motor.
btw yonas, your bc3 cams in the k24, youre using toda tensioner eh?
im worried with cammed motor in k24, read alot abt tensioner failure.
thanks for the info.
FLICK
05-04-2010, 08:53 PM
yeah, some ppl want less risk in their motor.
btw yonas, your bc3 cams in the k24, youre using toda tensioner eh?
im worried with cammed motor in k24, read alot abt tensioner failure.
thanks for the info.
Your right the toda tensioner does fail. The toda tensioner is just a modified honda chain tensioner. The one to get now is the skunk 2 chain tensioner.
A modified motor is always less reliable than a stock motor.
mocchi
05-04-2010, 08:58 PM
wow skunk2 tensioner haha.
i gotta check it out, didnt know abt that. i wonder how it compares to hybrid racing tensioner.
thanks for the info andrew.
yeah, some ppl want less risk in their motor.
btw yonas, your bc3 cams in the k24, youre using toda tensioner eh?
im worried with cammed motor in k24, read alot abt tensioner failure.
thanks for the info.
Yes toda chain tensioner
Been pushing it to 8500 rpm down the 1/4 mile and 8000 rpm for circuit racing
So far so good . And yes Skunk2 chain tensioner is available
Snoop_gee
05-04-2010, 09:42 PM
Tensiors wise as it has been mentioned before
There are 3 so far...
Skunk2
http://cms.skunk2.com/photo/l-313-c671e929859af538e6afc391eac3e393ef627ded.jpg
Hybrid Racing
http://www.hybrid-racing.com/store/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_9_3.jpg
Toda
http://ep.yimg.com/ca/I/twincamtech_2098_48266276
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.