PDA

View Full Version : ek b18c engine mount



5thgen_prel
30-03-2010, 10:47 PM
hi all..i have a ek1 with a b18c in it...nd one of the engine mount is broken...nd im plannin to buy a oem engine mount from honda...do i ask for an integra engine mount??

90LAN
30-03-2010, 10:48 PM
ek4 engine mounts

5thgen_prel
30-03-2010, 10:51 PM
when i did the transplant..i had integra mount nd ek1 mount which one did u tink they used?? does integra ones fit??

bennjamin
30-03-2010, 11:55 PM
you mean REAR engine mount ?

You can use anything off any EG/DC or EK all the same.

Aydin
31-03-2010, 12:39 AM
hey mate if i where u i wood upgrade to hasports ok i noe they are expencive but they are relly good your car will be performing much beter the response when you change gear will be quicker. they are a very good mount and i would advise any one whos engine mountsbrake every so often like me to get hasports. my cousin changed his set of oem honda mounts 3 times on his b18c7 e.g he upgraded to hasport not one problem

AXS
31-03-2010, 01:07 AM
hey mate if i where u i wood upgrade to hasports ok i noe they are expencive but they are relly good your car will be performing much beter the response when you change gear will be quicker. they are a very good mount and i would advise any one whos engine mountsbrake every so often like me to get hasports. my cousin changed his set of oem honda mounts 3 times on his b18c7 e.g he upgraded to hasport not one problem

:thumbsup: hasport FTW!

lsvtec
31-03-2010, 10:58 AM
innovative mounts

tiah313
31-03-2010, 12:56 PM
how much for a set of hasport mounts for dc2r?

ECU-MAN
31-03-2010, 02:28 PM
which mount are you after.

5thgen_prel
31-03-2010, 04:48 PM
thanks guys i just fixed the one tat waz broken todai nd prob save for hasport or somethin but i heard its a very good drive with them in as the car shakes alot