New pb b18c crx!

[Behtec_JunKIE]

hey guys
went out to the drags tonite and got about 20 runs. i beat my pb of 13.2 on street tyres and cracked a 12.6@103mph 1.763 60ft. im stoked by the time i got but the nite endned with a broken drive shaft:(. but overall it was good thanks to all the honda guys who gave me a hand

:D

[bennjamin]

who needs a k to do 12s ?

absolutely fantastic times !

[Behtec_JunKIE]

who needs a k to do 12s ?

absolutely fantastic times !
thanks man

[Snoop_gee]

what sort of suspension setup are u running?!?!?!?

[Behtec_JunKIE]

i got coilovers for this run i set it 7 kg at the front and i changed the spring in my rear to 17.8 kgs but it still squatted at the rear but it helped gud on my launch

[Snoop_gee]

ye but what type or brand are they ?!?!

17.8kgs at the rearss.. DAYMN>>> :O

[Behtec_JunKIE]

ohh lol apexi n1 coilovers the standard spring that comes with it is only a 5kg but the 17.8 i have is from a supra that i got off a mate

[TGZ80Y]

nice one tol..... super fast vtec hehehehe :) well done :)

[Snoop_gee]

apexi n1 coilovers thats good that ur using those cause i havent heard anyone using these.

CRX suspension ive heard so far is..

Skunk2 Pro C's
Tien
BuddyClub

p.s how does the spring from say a supra fit and work with the apexi n1 coilovers which im guessin is for a Honda.

[Behtec_JunKIE]

well the apex1 n1 coilovers are for a dc2 eg but i made it fit my car by changing the lcas and front forks etc didnt change anything from wat i can see and the spring from the supra is for a coilover in a supra so it fit quite easy ill show u

http://i217.photobucket.com/albums/cc235/12rpm/spring1.jpg

http://i217.photobucket.com/albums/cc235/12rpm/spring1.jpg

[Behtec_JunKIE]

sorry double pic lol
http://i217.photobucket.com/albums/cc235/12rpm/spring2.jpg

[EG5]

Welcome to 12 sec club :)
As I told you for so long , chuck a slicks on and you will run 12s too easy.
Are these 23.5 inch slicks ?

[Behtec_JunKIE]

Welcome to 12 sec club :)
As I told you for so long , chuck a slicks on and you will run 12s too easy.
Are these 23.5 inch slicks ?

thanks bro yeh should have done it long ago ummzz not sure there damos slicks lol i think its 15/225

[zco]

what kinda other modiciations do you have, your car sounds hektik !

[Behtec_JunKIE]

what kinda other modiciations do you have, your car sounds hektik !

thanks man
i have a blox intake ran with the filter for one of the 12.6 pass i did and the rest without
toda headers
2.5 exhaust
apexi power fc

[_CRX_]

Well done........... and in a CRX too even better

[RR-04-RR]

Congrads!

Definitely must be happy with that time! Unbelievably quick time for a B18 with the basic mods:D

[Snoop_gee]

Well done........... and in a CRX too even better
thats it :thumbsup::cool: CRX ALL THE WAY !!!!!!!!!

[Snoop_gee]

well the apex1 n1 coilovers are for a dc2 eg but i made it fit my car by changing the lcas and front forks etc didnt change anything from wat i can see and the spring from the supra is for a coilover in a supra so it fit quite easy ill show u

http://i217.photobucket.com/albums/cc235/12rpm/spring1.jpg

http://i217.photobucket.com/albums/cc235/12rpm/spring1.jpg
Your the Man.

Do u have pics of ur crazi quater mile run ?!?! :confused:

And the fact its N/A as well :eek:

[Behtec_JunKIE]

Thanks for all the comments guys
and snoop ill try and get the video

[Lukezen27]

Fok that's wicked bro :thumbsup:

NA pownage!

Light weight CRX + B18 + slicks = fast as hell :p

[EG5]

Fok that's wicked bro :thumbsup:

NA pownage!

Light weight CRX + B18 + slicks = fast as hell :p

You car will run 12s too on slicks

[Sexc86]

dam great time nice stuff!

[fatboyz39]

Congrats!

[zco]

thats so sick.. crx + 1b8c+ i.h.e.tune + slicks = 12's

[gen2 CRX]

CRX chassis FTW. Just ran a 14.9 @ 90mph with my d16a8 I/H/E full street trim.

[bennjamin]

CRX chassis FTW. Just ran a 14.9 @ 90mph with my d16a8 I/H/E full street trim.


that proves it....same engine in a eg sits on low 15's

[zco]

CRX chassis FTW. Just ran a 14.9 @ 90mph with my d16a8 I/H/E full street trim.

were you at teh shell petrol station before ? i think i saw you earlier. you were looking for a place to pump your tyres haha. your car didnt look like street trim though

[bennjamin]

whats the tare weight of a CRX minus driver and basic interior ( usual mods for the strip ) ?

[Dems]

just had mine on a public weigh bridge with B18C7 and full trim

980kg no driver.

P.S. Awesome time, can't wait to get to the strip!!

[Benson]

Congrats on the time

Very jealous of the weight of your car :p

[Behtec_JunKIE]

whats the tare weight of a CRX minus driver and basic interior ( usual mods for the strip ) ?

im guessing maybe 930 to 910 with all seats and interior bits


Congrats on the time

Very jealous of the weight of your car :p

haha thanks man dw bro im sure u can get lower just start cutting lol

[damo46]

man congrats on that time... Thats one hell of a fast crx for the minor things done...
Thats rediculous..... Upload some vids would love to see em

[gen2 CRX]

were you at teh shell petrol station before ? i think i saw you earlier. you were looking for a place to pump your tyres haha. your car didnt look like street trim though

yeah that was me why didn't I see your EK at the strip?? I was the only Honda.

[zco]

i dont drive an ek anymore.. i drive that white mazda astina that was there lol
the black EK that was there on gold advan RG's was my friends car. we were working on it that day

[DNYALL]

hell yeah mate, awesome time!! u must be stoked :thumbsup: I am soo keen to get my car to the 1/4!!

[EGB18CT]

that's a tasty time! must be happy with that!

chuck it on the bottle for giggles!

[markoJEK1]

very nice time for such simple mods, goes to show, its all about the setup to transfer the power to the ground :thumbsup: ( of coarse power to weight plays a big role also ) , making me want to throw on some slicks and see what it can do, what power has it made once tuned?

[Snoop_gee]

is the rears EYELETS or FORKS?!?!

[gen2 CRX]

should be eyelets on da jap spec

[Behtec_JunKIE]

very nice time for such simple mods, goes to show, its all about the setup to transfer the power to the ground :thumbsup: ( of coarse power to weight plays a big role also ) , making me want to throw on some slicks and see what it can do, what power has it made once tuned?

thanks man im making 118kw atw tuned by joe at hi comp performance


is the rears EYELETS or FORKS?!?!

hahaha its from a eg so its not eyelet.


should be eyelets on da jap spec

should be lol

[Behtec_JunKIE]

btw snoop wen u running urs or have u run urs\??? should get good times ur car would be a machine...

[Snoop_gee]

btw snoop wen u running urs or have u run urs\??? should get good times ur car would be a machine...
Gee's Update : the motor comes back out in the month of May for the enginebay to be shaved... :cool:
i would like to look @ camber kits and other suspension gear and the like after the bay is shaved.

Now that there is a bit of power going thru a 20yr old car that has age old suspension i can really see why people really get into upgrading setups with handling etc.

The way it behaves apon acceleration the back end squats and the front wheels spin like crazi.
All i have atm is Koni yellows on stock springs haha ;)

[Lukezen27]

Gee's Update : the motor comes back out in the month of May for the enginebay to be shaved... :cool:
i would like to look @ camber kits and other suspension gear and the like after the bay is shaved.

Now that there is a bit of power going thru a 20yr old car that has age old suspension i can really see why people really get into upgrading setups with handling etc.

The way it behaves apon acceleration the back end squats and the front wheels spin like crazi.
All i have atm is Koni yellows on stock springs haha ;)

Man I so want'a do an engine bay to be shave but my race car is my weekly work car hahah

Bro got'a move over to coilovers so ya can adjust when needed

Makes life so much easier

[beeza]

Great stuff!!

Ur car would benefit from full slicks Marko!