PDA

View Full Version : Koni Issue In A Teg



kikxz
03-04-2010, 12:07 AM
Hey guys just some advice ..

ive just recently installed Neuspeed Koni Yellow's and what not for a DA9/ LS integra and at first i had problems with my king spring lows fitting .. so i had to remove and reinstall with EG shockers which fit fine and snuggly on the perch but now when i am driving i am getting a Rubbing/Knocking sound coming from the left hand side especially when i go over certain bumps and
also goin straight and especially when i turn either left or right

Although none of this has happened when i was running stock DA9 shocks with the kings.. i had issues with king springs with the koni's due to sizing of the perch so i now changed to EG springs with DA9 koni yellow shocks

Any ideas people ive run out of possibilities

flipmods
09-04-2010, 08:01 AM
I got a pair of perches from another set off a prelude, 42mm internal hole and to suit spring with bottom internal hole of 65mm. Double check your sizes and let me know. Also clear your inbox :)