Cascada
03-04-2010, 02:17 AM
Posted this a while a go in another thread,
had a few people before ask me how i did it.
Anyway was very simple. Most would do it differently im not fussed. Was just a quick thing i did one day.....
If you want to do this properly please use proper paint, all i used at the time was SCA (Super-cheap auto) i think it was Australian export or what ever that $3 stuff is.
Anyway, don't have many pics as I was lazy but here is most of it.
What i started off with:
http://i41.tinypic.com/24phw20.jpg
Sprayed 2cans of Undercoat Primer and left it to dry for about 2-3 hours.
Came back added 2-3 light coats of the black paint.
http://i30.tinypic.com/euemwp.jpg
On the car:
http://i29.tinypic.com/2iu2cki.jpg
Had some left over primer so i took the lid/cover of an old bucket/container and primered up the lip again. I then followed previous steps and painted the lip (in this case was a gloss red)...I added 2-3 coats of this and waited for it to dry:
http://i31.tinypic.com/aebog2.jpg
http://i28.tinypic.com/2zghpnr.jpg
As you can tell by the pics, I did not take the effort to mask the tyres off, so i picked up some satin black paint, put an old rim over the wheels i painted and sprayed the tyre over-spray in a satin black:
http://i25.tinypic.com/vwvbde.jpg
Put them on car, and done.
http://i31.tinypic.com/s2eltu.jpg
http://i31.tinypic.com/149tr9l.jpg
Followed same steps to do it in blue:
http://i26.tinypic.com/ogkth3.jpg
http://i38.tinypic.com/nef21c.jpghttp://i34.tinypic.com/123pee9.jpghttp://i37.tinypic.com/iolm6v.jpghttp://i36.tinypic.com/152yhxv.jpg
Then got over it all and got different rims that fitted better....and started it all over again :zip:
PS: all up would have cost around $15 in materials (if that) lasted good 6months on car with no dramas and are still sitting in shed fine.
had a few people before ask me how i did it.
Anyway was very simple. Most would do it differently im not fussed. Was just a quick thing i did one day.....
If you want to do this properly please use proper paint, all i used at the time was SCA (Super-cheap auto) i think it was Australian export or what ever that $3 stuff is.
Anyway, don't have many pics as I was lazy but here is most of it.
What i started off with:
http://i41.tinypic.com/24phw20.jpg
Sprayed 2cans of Undercoat Primer and left it to dry for about 2-3 hours.
Came back added 2-3 light coats of the black paint.
http://i30.tinypic.com/euemwp.jpg
On the car:
http://i29.tinypic.com/2iu2cki.jpg
Had some left over primer so i took the lid/cover of an old bucket/container and primered up the lip again. I then followed previous steps and painted the lip (in this case was a gloss red)...I added 2-3 coats of this and waited for it to dry:
http://i31.tinypic.com/aebog2.jpg
http://i28.tinypic.com/2zghpnr.jpg
As you can tell by the pics, I did not take the effort to mask the tyres off, so i picked up some satin black paint, put an old rim over the wheels i painted and sprayed the tyre over-spray in a satin black:
http://i25.tinypic.com/vwvbde.jpg
Put them on car, and done.
http://i31.tinypic.com/s2eltu.jpg
http://i31.tinypic.com/149tr9l.jpg
Followed same steps to do it in blue:
http://i26.tinypic.com/ogkth3.jpg
http://i38.tinypic.com/nef21c.jpghttp://i34.tinypic.com/123pee9.jpghttp://i37.tinypic.com/iolm6v.jpghttp://i36.tinypic.com/152yhxv.jpg
Then got over it all and got different rims that fitted better....and started it all over again :zip:
PS: all up would have cost around $15 in materials (if that) lasted good 6months on car with no dramas and are still sitting in shed fine.