Cl9 glove box removal

[ROBERT]

I have a rattle behind the glove box area and maybe I can see something loose if I can get the glove box out. I searched the threads but found nothing on this. Please help.

[biee2]

open your glove both as you usually would then press the 2 sides (left and right) inwards. lik your squashing your glove box......then pull down. your glove both should drop all the way down so you can see behind it.

hope this helps

[ROBERT]

Thanks for the info Biee, I couldn't find anything loose behind the glovebox but poked around a bit, but now the rattle seems to have gone.
QUESTION. Does anyone use their glovebox for keeping gloves in?

[Simonnn]

Thanks for the info Biee, I couldn't find anything loose behind the glovebox but poked around a bit, but now the rattle seems to have gone.
QUESTION. Does anyone use their glovebox for keeping gloves in?

Of course, what else do you use a glovebox for? :p

[tron07]

Usually its the arm that slows the opening of the glovebox that is causing the rattle. The arm is on the left side of the glovebox when you are sitting at the passenger side.

[ROBERT]

Thanks Tron, that sounds logical, I'll watch out for that in furure.

[raffyboy]

my glove box in CL9 05 is not flash