View Full Version : B18c1
aznstyler
18-04-2010, 05:07 PM
Hey guys, just wondering what car is the b18c1 from? anyone got some info about this motor?
tekung89
18-04-2010, 05:09 PM
its from the usdm integra gsr equivalent to the audm vti-r.
_bORdO_
07-05-2010, 12:41 AM
I probably dont need to say this but im itching!!
the AUDM version is called b18c2.
As tekung89 said b18c1 = USDM
thegame-01
11-11-2012, 01:48 AM
Is there any real difference besides one is USDM and the other AUDM??
_bORdO_
12-11-2012, 02:43 PM
Preformance wise ... No
infurNOS
13-11-2012, 03:32 PM
Is there any real difference besides one is USDM and the other AUDM??
http://www.ozhonda.com/forum/showthread.php?5936-GS-R-B18C1-VTi-R-B18C2&
infurNOS
13-11-2012, 03:33 PM
Preformance wise ... No
I thought b18c2 was 10.6:1 and c1 was 10.0:1 ?
_bORdO_
13-11-2012, 05:35 PM
I thought b18c2 was 10.6:1 and c1 was 10.0:1 ?
hrm... to my knowledge its
AUDM - 11:1:1
USDM - 10:6:1
however don't take my word as gospel
:o
JDM DC2R
13-11-2012, 06:13 PM
Americans run lower compression due to crapper fuel. Still put out similar power figures though.
If you going to buy a b18c1. I wouldnt save the hassle and get the b18c2!
Super-DA9
19-11-2012, 04:40 PM
AUDM B18C2 is defintely not 11:1, that's type R comp ratio...
B18C2 10:1CR
B18C1 10:1CR
Engines are identical minus the ECU's.
JDM B18C blacktop (SiR-G) 10.6:1CR
Sacan
21-11-2012, 12:32 AM
never seen anyone import an b18c1 engine from america?
waste of money
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.