Hondata S300

[skyfrank85]

Hi guys

i got HOndata s300 on my eg with b18c7

was try to set up the lunch control

but it won;t activate,

anyone got this problem on their S300?

or how you turn it on

cheers

[Chr1s]

Can you communicate with the S300 with no dramas?

It's very straight forward, activate it, set the parameters and upload it.

[ECU-MAN]

do you have a clutch switch installed

[BlueSiR]

i got the same problem too. how to set up the launch control

[ECU-MAN]

im pretty sure you need a switch on your clutch pedal connected back to the ECU, so the ECU knows when to launch the car

[DLO01]

Na you don't Ecu man. Well I think you can, but don't need. Its just a ignition and fuel cut at a pre-determined rpm. Theres are however number of settings.

OP, see below. What have you got the Launch Activation set to? Always on? If its Always on launch control is alway activated, and will work when below the pre-determined vehicle speed.

http://i13.photobucket.com/albums/a265/DLO01/Temp/DazzzaHondata_Launch.jpg

[94vtirozguy]

you need to first of all install clutch switch, then it needs to be configured in software.

[DLO01]

You don't NEED a clutch switch as I said above. Mine was set as above. 'Always on', therefore anything below 10kph would activate launch control. Depends what the OP is trying to do, as yet he hasn't got back yet.

[markoJEK1]

^ I can back this up, have had launch control set to always on and for it to be active as long as the vehicle is under 10km/h , set my desired rpm and works all day every day if I wanted it to

[Benson]

Make sure there isnt anything wrong with your VSS

[skyfrank85]

HI guys, i am very sorry, completly forgot i got this post, lucky i search first, be4 i post the same question again,

now what happen is i set the launch control to always on, set the limter to 8223RPM, activation rpm is at 4102RPM, fuel and igition stays at 0, am i doing something wrong? cos the launch control still not on, as i tired soma many times today,

Hi Benson, what is VSS?

any ideas?

was doing the shift light at the same time today as well,got it working, but not the launch control,

idea was got the feature, why not use it,

[dougie_504]

vehicle Speed Sensor.

[skyfrank85]

vehicle Speed Sensor.
is that the one on top of ur gearbox?

[dougie_504]

I think it is, yes, but I'm no genius TBH.

[TODA AU]

HI guys, i am very sorry, completly forgot i got this post, lucky i search first, be4 i post the same question again,

now what happen is i set the launch control to always on, set the limter to 8223RPM, activation rpm is at 4102RPM, fuel and igition stays at 0, am i doing something wrong? cos the launch control still not on, as i tired soma many times today,

Hi Benson, what is VSS?

any ideas?

was doing the shift light at the same time today as well,got it working, but not the launch control,

idea was got the feature, why not use it,

Why don't you lower the launch limiter rpm to something sensible & try again?
obviously it won't work at 8223rpm.... :p

Try this....

- always on (yes)
- invert output (no)
- Maximum speed - 10~15kph
- Launch Limiter RPM - 5000
- Fuel & ignition settings
Activation rpm 5500
Fuel 0 ignition 0

VSS is Vehicle Speed Sensor. If your speedo doesn't work, neither will this.
But you need to set the limiter below your normal rev limit 1st.
Hope that helps

[IEVAQ8]

also, if ur not in live/tuning mode, u will have to make changes, save ur file and upload it onto the ECU......

[DLO01]

now what happen is i set the launch control to always on, set the limter to 8223RPM, activation rpm is at 4102RPM, fuel and igition stays at 0, am i doing something wrong? cos the launch control still not on, as i tired soma many times today,
was doing the shift light at the same time today as well,got it working, but not the launch control,
Yes you are doing something wrong. :p

You need to set the BOTH the 'Launch Limiter RPM' and the 'Activation RPM' to your desired launch rpm of 4102rpm. At the moment you have your launch set to 8223rpm. Thats why its not working, well it is working, but at 8223rpm.

Launch Limiter is the RPM it will sit on to launch.

Activation RPM is the rpm amount to activate your fuel enrichment and timing.

[skyfrank85]

Thanks heaps guys, finally got the launch control working, yeah after read all the input, i am silly to set the limiter rpm to 8223,

but it's all good now,

thanks a lot guys

[DLO01]

Well done. Only taken yourself half a year. ;)