View Full Version : vti-r stud pattern
wynode
30-08-2003, 07:56 PM
Is the stud pattern on an vti-r (93-97) the same as an EG civic?
Also can you interchange shocks between the two cars?
ginganggooly
30-08-2003, 08:02 PM
4x100
they are the same...
i'm not 100% on this, but from memory, my koni shocks had the same part numbers as those for the eg civics. might want to check it out a bit more thoroughly though.
wynode
30-08-2003, 08:38 PM
Cheers, thanks for that.
The shocks and rear bar are the same part number.
vti-2
31-08-2003, 11:42 AM
Yeah, same stud pattern.
When i got mine lowered i was speaking to the guys about aftermarket Honda shocks/springs etc and they reckon that EG and DC2 can be interchangeable. He also said they had installed EK springs in a DC2 before... :roll:
VTi-RT
01-09-2003, 11:22 PM
I'm not certain, but companies sell parts saying they fit EK/DelSol/DC2 ....
Hadean
02-09-2003, 09:47 AM
YES THEY FIT. I have fitted Integra VTi-R wheels to EG civic (sedan Si).
Spunkymonkey
10-09-2003, 10:20 AM
I'm not certain, but companies sell parts saying they fit EK/DelSol/DC2 ....
Most hondas released here are the 4 x 100 stud pattern.
Apart from some of the later models of accord, prelude, s2000,teg,etc
Also some of the earlier civic models were 4 x 120.
not trying to hijack the thread here or anything but what does the "100" or "114.3" mean??
i have yet to find out...
Hadean
10-09-2003, 02:40 PM
If you had a circle, and the centre of the studs were points on the circumference of that circle, then the PCD is the diameter of that circle.
PCD = Pitch Circle Diameter (in millimetres mm)
If someone said just 'pitch', then that distance is the distance between each adjacent stud.
EL_DC5
15-05-2007, 04:34 PM
yes of course my horse
incoming
15-05-2007, 04:39 PM
see below
way to bring up and old thread douche bag
the year is 2007 not 2003 lol
Q_ball
15-05-2007, 04:52 PM
Spammers..
Closed.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.