PDA

View Full Version : Injen cai sensor


aimen
25-04-2010, 09:45 AM
Hi guys installed injen yesterday wow what a noise but i have on e problem the sensor cable doesnt go into the grommet of the pipe properly its very loose and feels like its going to fall out.
Is this normal? Or should it go in and be very hard.

Im thinking of taping it up with duct tape.

Anyone with the injen cai please let me know cheers
r3ckless
25-04-2010, 09:50 AM
It should be a very snug fit. Push harder lol
thegame-01
25-04-2010, 10:23 AM
u can try to use a screw driver to help. or lube it up. its a very snuggle fit. dont be afraid to force it in
aimen
25-04-2010, 11:16 AM
u can try to use a screw driver to help. or lube it up. its a very snuggle fit. dont be afraid to force it in

what happens if the sensor falls out??????? or isnt in properly???
thegame-01
25-04-2010, 11:25 AM
install the grommet in first then you can put the sensor once its in. as show in the pics below (pics used from clubrsx)

first...
http://www.the-meadows.info/projects/vS/images/DPP_0032.JPG

second...

http://www.the-meadows.info/projects/vS/images/DPP_0041.JPG
thegame-01
25-04-2010, 11:29 AM
oh and his the DIY incase needed :D let us know how this it goes

http://forums.clubrsx.com/showthread.php?t=625472
aimen
25-04-2010, 11:34 AM
What im trying to say is the grommet is in perfectly but the sensor cable that you stick into the grommet is very loose and fiddly its not in properly and ive pushed as hard as i can and wont go in.
what does the sensor do anyway? is it important
thegame-01
25-04-2010, 11:51 AM
its a must to have the sensor plugged in. have you tried lube around the grommet to make it go in easier ?
WATAJK
25-04-2010, 01:52 PM
Mines plugged in... Abit loose but never had a problem of it falling out mate.. Mines been installed for 3 months.. I understand what your saying... Mines fine though..
J_Phongsavan
26-04-2010, 02:03 AM
i was in the same situation when i was installing my injen on my DC5R after when i put the gromet in, the sensor was like small and loose for it to stay in with the gromet. i looked at pics and diagrams of other cars of how it suppose to go in... id just duct tap it round the sensor so it holds in place with the gromet, never fall off...