neptune tuner view II

[BlueSiR]

Hi

does anyone have this unit in their car?

how to get it work,

now my problems are when i plug it with my computer, screen comes up nothing, no even light on

and when i plug it with my hondata S300, lights up, but nothing shows?

can someone please help me with some ideas here,

got no idea how to get it work

thanks

[DLO01]

Should be lighting up as soon as you turn ignition on. Are you sure you have it wired up ok?

S300 via usb cable to Module. Module-Tunerview display via pre-made cable.
Module requires power: Green is 12V accessories and White is ground.

After you do that it should light up with ignition on.

Once that is done you need to turn Datalogging OFF in the S300 to get it to work.

[BlueSiR]

Should be lighting up as soon as you turn ignition on. Are you sure you have it wired up ok?

S300 via usb cable to Module. Module-Tunerview display via pre-made cable.
Module requires power: Green is 12V accessories and White is ground.

After you do that it should light up with ignition on.

Once that is done you need to turn Datalogging OFF in the S300 to get it to work.

thank you for the quick reply,

i sort of got the idea how to get it work with hondata now,

but how you program it on ur computer? i mean with the display setting, warming and some other setting?

thanks again for your help

[DLO01]

You need to set up the screens first man. Forget about hooking it up to the car for now.

Get the software and drivers off the website.
http://www.hrtuning.com

Then with the software, and Tunerview hooked up via usb the the computer you need to setup everthing. Very easy to do. I actually had problems connecting initially and after much headbanging, I uninstalled the driver and reinstalled it and it connected.

http://i13.photobucket.com/albums/a265/DLO01/Misc/Image043.jpg

http://i13.photobucket.com/albums/a265/DLO01/Misc/Image044.jpg

[BlueSiR]

Hi DL001

i am still having problem trying to connect it to computer,

i remove the driver and software and download it again,

open the tunerview program software, using COM6 to connect it, the bottom works, change to connecting, but after try heaps of times, still cannot connect the tunerview to computer,

any though?

[BlueSiR]

also, when i am trying to connecting the tunerview to the computer,

does the tunerview screen suppose to show something or just blank after the usb cab;e is connected to the computer usb port?

cos my showing nothing no even lights up

[DLO01]

I suggest getting on their forums. Should answer all your questions. Sorry, but its been nearly 2 years since I last installed this. I'm not sure if it maintains the 'connecting' status while you program it.
http://www.hrtuning.com/forum/

[BlueSiR]

I suggest getting on their forums. Should answer all your questions. Sorry, but its been nearly 2 years since I last installed this. I'm not sure if it maintains the 'connecting' status while you program it.
http://www.hrtuning.com/forum/

thanks a lot for your help anyway,

i will try to contact them,

no, it didn't maintain the connecting status, it was like status is connecting for 2 sceonds then back to status disconnect