PDA

View Full Version : What else do i need for my front sway bar set up? Pics****


Gio
02-05-2010, 09:10 PM
Hey guys,

I have some front sway bar parts including ek9 lca's and was wondering if you could let me know what else i need?

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0456-1.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0455.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0454.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0453.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0451.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0450.jpg

http://i88.photobucket.com/albums/k177/chrisgiovine/IMG_0452.jpg


Thanks heaps guys,

Chris.
Killa From Manila
02-05-2010, 10:46 PM
u need 2 nuts to connect the endlink to the lca, and 4 bolts to connect the d brackets to the subframe
Tai
02-05-2010, 10:52 PM
Nuts and Bolts and you're set.
Gio
02-05-2010, 11:09 PM
**** yeah, thanks heaps guys, all going on inc. rear ek9 sway on wednesday /wets pants.

Thank you.
Gio
02-05-2010, 11:12 PM
Repped tai, kila i already repped u so it wont let me again, someone rep him for me!!

Should i get rid of the surface rust on the lca's and end links using some kind of rust removing spray? Im guessing i should just so it doesnt spread.
mugen_ctr
04-05-2010, 09:10 AM
make sure you use lock nuts for the end links, an not jus any ordinary nuts, last thing you would want is the thing come off loose...... If i remember, the thread size is M10, most automotive places e.g supercheapauto an autobarn should have em
Gio
04-05-2010, 12:54 PM
u need 2 nuts to connect the endlink to the lca, and 4 bolts to connect the d brackets to the subframe

Do u know what size would be best in terms of bolt length?

Mugen CTR - Thanks mate ill have to go check.
Killa From Manila
04-05-2010, 06:15 PM
30mm of thread should be more than enough, i cant help u with what thread it is though as luckily a mate had the right bolts laying around when i installed mine.
Gio
04-05-2010, 07:34 PM
Picked up nuts and bolts today. Went to supercheap, they were not helpful and then went to bunnings and the old dude there was awesome but they didnt stock the thread i needed. Then went to nuts and bolts nerang and took the sway bar in and he new the thread size and nut that would fit by just looking at it. Four 3 inch high tensile bolts and lock nuts and 2 nuts for the endlinks came to 5 bucks and honda quoted me 3-4 dollars each for the nuts which had to be shipped from melbourne. lol.