View Full Version : Vtec on and off not working properly
Hi all My vtec has been coming on and off lately like itll kick in at 6k rpm then die at 6.5 and come back at 7.5 and random shit like that. Anyone have any suggestions? Ive already checked oil and pressure.
cheers
hisoka
05-05-2010, 04:30 PM
get a vtec light wired up and check if the signal itself is turning off or not . this should give you a good basis to begin with.
what mods and what ecu are you running. and last mods done to your car would help
sweet ill do that asap cheers.
Car is quite stock but i just upgraded the exhaust and high flow cat, that cant have anything to do with it
Aydin
06-05-2010, 03:25 PM
check oil, check speedo sensor, check vtec wire...if still same after those check have been cleared, then run a diagnostics...
ewendc2r
10-05-2010, 10:45 PM
sounds like oil pressure?
DC2-PWR
10-05-2010, 10:52 PM
Change oil aswell
espionage85
07-09-2010, 09:01 AM
what was the outcome?
im having problems to
hisoka
07-09-2010, 09:34 PM
lol if you got a dirty airfilter, that will stop it from working too, new discovery this one
DC2-PWR
07-09-2010, 09:49 PM
lol if you got a dirty airfilter, that will stop it from working too, new discovery this one
lols i wonder how dirty the filter would be to stop vtec
na-118
07-09-2010, 10:53 PM
Change oil aswell
you wouldn't wana jump straight into changing the oil that's 25-50 dollar right there, though do check condition of oil
espionage85
08-09-2010, 09:37 AM
how do i check oil preasure? or do you guys just mean check oil levels?
just had a service a week ago has 20-50w in it
and what does a dent in the oilsump do with it lol
coz i might have a lil ding in mine
zropts
08-09-2010, 04:00 PM
ditry vtec solenoid & check 100A fuse in fusebox (under bonnet next to battery).
nickk
08-09-2010, 04:41 PM
could be the vehicle speed sensor!!! check the plug to see if the pins are farkd. exact same thing happened to me.. then vtec fell off. Changed the connector for it and then I could start scaring kids at bus stops again.
hey guys thanks for all the help i forgot to report back, after trying 2 different speed sensors and the problem wasn't fixed I found out that the actual plug that sits on the gearbox was farked as Nickk mentioned.
So if anyone has this problem make sure u check both the sensor and the plug!
espionage85
08-09-2010, 06:16 PM
could be the vehicle speed sensor!!! check the plug to see if the pins are farkd. exact same thing happened to me.. then vtec fell off. Changed the connector for it and then I could start scaring kids at bus stops again.
more details and description please...
nickk
09-09-2010, 09:47 AM
I will take photos on my lunch break and write a description :)
VTec1987
09-09-2010, 09:53 AM
dent on the oil sump will affect the oil pressure hence vtec wont work.....
itequilla
09-09-2010, 08:44 PM
i heard theres a vtec sensor you can check if leaking?
meatball
09-09-2010, 10:23 PM
clean out the vtec solenoid?
WTF 25-50 are you serious ... shieettt lol
na-118
11-09-2010, 04:25 PM
20 50 is to cover up the tappet noise when selling it haha
TODA AU
12-09-2010, 04:59 PM
? really ? Why not just adjust em?
na-118
12-09-2010, 05:52 PM
LOL might be selling it and dont wana spend 150 getting them adjusted
hisoka
12-09-2010, 09:39 PM
20 50 is to cover up the tappet noise when selling it haha
LOL oh shiet, secret out
espionage85
12-09-2010, 11:10 PM
not selling it, mechanic put it in.
just changed it to oem 10-30, runns alot better, but still isnt kicking as strong as i would like it to
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.