eg stock rails vs dc2 stock rails

[thj822]

im planning to upgrade my seat in my eg civic, but i want to know

1. are the eg rails straight bolt onto the dc2 seats

2. are stock eg rails are lower than stock dc2 rails? i dont want the seat high up my head will touch the roof, i used to have ek seats in my eg. was abit too high. dont know if it was because i used the ek rails.

3. are the rails exactly the same.

[pablos8]

i'm pretty sure the rails are exactly the same, not sure on the height though

[androo]

I'm changing my Integra's seats tomorrow (most likely if I have time if not then definitely on the weekend). You're welcome to come past and check for yourself? Just a thought! However someone on this forum might be able to tell you off the top of their heads. But if you want PM me - Parramatta area.

[hisoka]

eg and dc2 rails are the same bolting points.

i have dc2 gli seats in my eg and they seem to be same height aswell.

hope this helps.

if they eg rails dont fit on the dc2 seats you can just swap out the seat pans and that will make it fit definately

[androo]

I don't think you need to do the whole pan - Just unbolt the rails and switch them over. Definitely doing my car tomorrow yay! =D