PDA

View Full Version : Jazz Double DIN centre console install



Kit
19-12-2004, 10:08 PM
Hi guys,

I'm about to embark on the Double DIN conversion for the jazz.

I've got the panel, brackets, single din pocket and Headunit, all ready to go.

One thing is that i am having trouble finding the instructions on how to remove the stock standard centre console, I remember seeing it posted here once, it had pictures and step by step instructions.

All i can find is the Sony PDF file which isn't very clear.

Also anyone here installed it already? and did you use a Harness for the wiring?

thanks

Sp3rMz
19-12-2004, 10:11 PM
I can't help you with your questions sorry but I'd like to see some photos as you go along. You can right up another DIY article for Jazz. :thumbsup:

Kit
19-12-2004, 11:28 PM
if you can help me find the instructions, i'll do the write up :)

civiceg9
19-12-2004, 11:31 PM
I help my friend install it
I think he post some pics on here before

Kit
19-12-2004, 11:33 PM
Civiceg9, do u know where the pictures are?

sp3rmz, btw, i've already mounted the single DIN pocket and headunit into the double din conversion panel and it looks really good

civiceg9
19-12-2004, 11:38 PM
http://www.ozhonda.com/forum/showthread.php?t=9829

here I find it

TypeG
19-12-2004, 11:47 PM
lol
that's locate in a very secret place......

Kit
19-12-2004, 11:47 PM
thanks a lot man! i totally missed that thread when i was searching for it.

By the way, for all those looking for the single DIN pockets.

I bought one from Strathfield Car radios for $26. It was called a Turbo pocket or something and it was actually for nissan and toyota.
It fits the jazz, console, except the face plate may not fit exactly but its still better than a hole there.

I'll post pics when its finished.

Btw, Civiceg9. did you use a harness for the wiring? or did you do the snip and connect method?

civiceg9
19-12-2004, 11:50 PM
just cut and weld it.

just becareful taking the face of the dials, if u push it out it will break.
use a knife or something flat to get those off

Kit
19-12-2004, 11:56 PM
just cut and weld it.

just becareful taking the face of the dials, if u push it out it will break.
use a knife or something flat to get those off
cool thanks for the tip.

I'll be using a harness, that way it will retain the factory wiring so can be easily reverted back to stock if needed.

I did some research and found that the Jazz has the same plug as the Civics and CRVs and some Accords.